Quantcast
Channel: All Routing posts
Viewing all articles
Browse latest Browse all 8688

Re: Balancing between default routes

$
0
0

Hello

It seems all is fine with a next-hop

 

 

run show route forwarding-table destination x.x..225.38

Routing table: default.inet

Internet:

Destination        Type RtRef Next hop           Type Index    NhRef Netif

x.x..225.38/32   dest     0 ec:30:91:43:37:7f  ucst     1331    68 vlan.1108

 

Routing table: __juniper_services__.inet

Internet:

Destination        Type RtRef Next hop           Type Index    NhRef Netif

default            perm     0                    dscd     1282     2

 

Routing table: __master.anon__.inet

Internet:

Destination        Type RtRef Next hop           Type Index    NhRef Netif

default            perm     0                    rjct     1301     1

 

run show route forwarding-table destination x.x..225.42

Routing table: default.inet

Internet:

Destination        Type RtRef Next hop           Type Index    NhRef Netif

x.x..225.42/32   dest     0 3c:df:1e:ef:3c:d5  ucst     1352   114 vlan.1110

 

Routing table: __juniper_services__.inet

Internet:

Destination        Type RtRef Next hop           Type Index    NhRef Netif

default            perm     0                    dscd     1282     2

 

Routing table: __master.anon__.inet

Internet:

Destination        Type RtRef Next hop           Type Index    NhRef Netif

default            perm     0                    rjct     1301     1

 

 

About ospf cost. Sorry it was wrong out of "show" - I was testing a lot.

Now I fix it and cost is equal but the issue doesn't solve

 

run show ospf interface detail  

 

Interface           State   Area            DR ID           BDR ID          Nbrs

vlan.1108           DR      0.0.0.0         10.10.10.12     x.x..225.12      1

  Type: LAN, Address: x.x..225.37, Mask: 255.255.255.252, MTU: 1500, Cost: 150

  DR addr: x.x..225.37, BDR addr: x.x..225.38, Priority: 128

  Adj count: 1

  Hello: 1, Dead: 3, ReXmit: 5, Not Stub

  Auth type: None

  Protection type: None

  Topology default (ID 0) -> Cost: 150

vlan.1110           DR      0.0.0.0         10.10.10.12     x.x..232.89      1

  Type: LAN, Address: x.x..225.41, Mask: 255.255.255.252, MTU: 1500, Cost: 150

  DR addr: x.x..225.41, BDR addr: x.x..225.42, Priority: 128

  Adj count: 1

  Hello: 1, Dead: 3, ReXmit: 5, Not Stub

  Auth type: None

  Protection type: None

  Topology default (ID 0) -> Cost: 150

 

 

0.0.0.0/0          *[OSPF/150] 1d 17:22:36, metric 1, tag 1
                    > to x.x.225.42 via vlan.1110

 

 


Viewing all articles
Browse latest Browse all 8688

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>