Re: transfer suscriber license from chasiss RMA on mX480?
Save the output of the license on the current deviceluser@host> request system license save filename...
View ArticleRe: How to configured StaticBW for each RSVP Class Type
Hello, You can refer this. https://www.juniper.net/documentation/en_US/junos/topics/usage-guidelines/mpls-configuring-routers-for-diffserv-aware-traffic-engineering.html Regards, Rushi
View ArticleRe: transfer suscriber license from chasiss RMA on mX480?
Hi Spuluka, So can i conclude that the suscriber license is tied with RE not the chassis serial no. If i take the RE that already apply the suscriber license to another MX then the license should...
View ArticleRe: MX series dynamic nat help
Unfortunately some voip services didnt like napt with pat and play station network lists as stricked nat. Psn is the biggest pain in my a$$My goal is to over use my ip blocks. We are a smaller wisp...
View ArticleRe: IPv6 SAFI 128 support on Junos for IPv6 BGP peering
Thanks for the response python. I'm familiar with implementation using IPv4 peering or stating a local IPv4 address under the address family on an IPv6 peer. I was trying to create an MPLS network...
View ArticleRe: IPv6 SAFI 128 support on Junos for IPv6 BGP peering
Hi Pevangelista,I am not aware of configuration of below AFI/SAFI with IPV6 neighbours,AFI=2, SAFI=128, L3VPN IPv6 unicast
View ArticleRe: MX series dynamic nat help
Hello,Chris Bay wrote:Unfortunately some voip services didnt like napt Any concrete examples? I know for a fact that:- Skype- Viber- WhatsApp- Vonageand several more modern VoIP services work just fine...
View ArticleClik here to view.
ethernet OAM/CFM frames in EVPN domain
Hi all, Let me know if you have any test result/opinion about the following.CE---| EVPN Domain(MPLS/MPLS-PBB/VXLAN either will do) |---CE|<---------------------------etherne...
View ArticleRe: transfer suscriber license from chasiss RMA on mX480?
That seems possible, but I can't confirm what happens when you apply a license file to the MX. It is possible that the serial number of the chassis is part of whatever the Junos add license process...
View ArticleRe: ethernet OAM/CFM frames in EVPN domain
I've not used EVPN as yet, but I can confirm that with VPLS and l2circuits you can setup CFM tests from devices on either side of the circuit and run a complete test on the set. You do need to be sure...
View ArticleRe: IPSEC Tunnel over VLANS
Just wanted to give an update. So I was thinking way to hard on this. The switches are only acting as trunks for tagged traffic from the routers. Based on the original diagram I posted, that was...
View ArticleClik here to view.
Re: ethernet OAM/CFM frames in EVPN domain
Thanks for the reply and your recommendation Looking forward to hear from others too Regards,Hadi
View ArticleRe: Do they have the same effect of route-filter?
Hi, IMO, for the group one, it will not hit the send match statement of "upto" upto prefix-length2The route address shares the same most-significant bits as the match prefix (destination-prefix or...
View ArticleRe: which one is prefer detour or secondary standby when ingress and PLR is...
Hi, Good question, I think, as per the logic, first local-repair should trigger and then followed by global repair. Local repair would mean switching to bypass or detour and global repair would mean...
View ArticleRe: IPSEC Tunnel over VLANS
So does this mean your really cannot run the VPN from router A but it has to be on router B?
View ArticleRe: MX 480 randomly dropping traffic.
Although Late, but this problem was caused by L2-loop in one of our ERP rings. this has also occured second time to one of other routers and we had to deploy VPLS loop prevention as the ERP terminates...
View Articlecan i have two dynamic profiles configured on the same MX-480 ?
Hi All, Am trying setup second dynamic profile and second access profile on juniper MX-480 router. below is the profiles setup. production { interfaces { pp0 { unit "$junos-interface-unit" { no-traps;...
View ArticleHow to check how long the PEM or CB already online ?
Hi all, May i know whether has a command on MX to check how long the PEM or CB ahs been power on. Thanks and appreciate some help.
View ArticleRe: How to check how long the PEM or CB already online ?
Hello, You can check this link for CB related information. https://www.juniper.net/documentation/en_US/release-independent/junos/topics/task/installation/scb-mx960-replacing.html For PEM, I was not...
View Article