Re: BGP not coming UP in logical system SRX
It looks like the iBGP is between VR1 and VR2 but I don't see the interfaces that have those ip addresses declared and assigned to the appropriate VR. Are those the lt0 interface addresses or...
View ArticleRe: BGP not coming UP in logical system SRX
Can you add a trace options file to both VR and review the results of the failed peering. set routing-instances VR1 protocols bgp traceoptions file bgpVR1set routing-instances VR1 protocols bgp...
View ArticleRe: VoiP, RTP and DSCP
Hi Adwivedi, Thank you for the response. Much appreciated. I'll try and work something out from the "Day-one" book and from the link you have shown here. If anyone else also has some ideas that would...
View ArticleClik here to view.
Re: VoiP, RTP and DSCP
HI adgwytc, You should try to use consistent CoS implementation across your domain. So if upstream routers are part of your network, I would suggest to review cos implemetation on those routers and...
View ArticleRe: Single-session dual-stack subscribers - how it works?
Hello karand.looks like ther is issue with single-session dual-stack.With configuration like this:dhcpv6 { overrides { delete-binding-on-renegotiation; dual-stack DS; } group ipv6-stacked-subscribers {...
View ArticleRe: BGP not coming UP in logical system SRX
I did the log configuration but there is not even a single log generating. My doubt is, do we need any connectivity between user logical system and root logical system to make the BGP up? If so what I...
View ArticleRe: import override for individual eBGP peers
For your other query, I would say, Using prefix-list or not depends on network requirement. Unless you end up exhausting any network resource, it should be okay. On the other side, using other...
View ArticleRe: import override for individual eBGP peers
Thanks very much to all contributors for your time and for clearing that up for me. Much appreciated.
View ArticleRoute leaking and floating unreachability
Hi people,I have clustered 2xQFX5100. It has very interesting config and issue related to it.So let me introduce. Box is separated into three routing instances(type virtual-router) with route leaking...
View Articlecan I set up DNS domain Search on Juniper SSG5
I have a private network that I connect to that i would like name resolution to work on. basically, I want to send all traffic with the .local.mesh domain out to 192.168.1.200(this is my private...
View ArticleRe: can I set up DNS domain Search on Juniper SSG5
Hi Folks,My 2 cents on this… Here is the example of the Proxy DNS configuration : set interface ethernet1/2.1 proxy dnsset dns host dns1 <snipped>set dns host dns2 <snipped>set dns proxyset...
View ArticleRe: VoiP, RTP and DSCP
Hi Amitsaxena Thank you for your description. Very helpful..... So would something similar to the following be good (as a starter):set class-of service classifiers dscp voip import defaultset...
View ArticleRe: BGP not coming UP in logical system SRX
Looking over the configuration again you have the two VR in the base routing instance and not the logical system set routing-instances VR1set routing-instances VR2 should be set logical-systems LSYS...
View ArticleIPv6 SLAAC Global Address Assignment over PPP using SRX300
Hi all, I'm currently attempting to configure an SRX300 as dual stack, using an FTTP connection. The IPv4 works fine, PPP authenticates and the LNS (Cisco ASR) assigns the addressing correctly. The...
View ArticleIs it cisco compatible with juniper kompella?
Hi all,May I know in this 2018, whether cisco can compatible with kompella in juniper in term of l2vpn setup? Im try google and last thread on cisco forum 2012 said cannot interop and need to use...
View ArticleRe: Single-session dual-stack subscribers - how it works?
Looks like there is issue with primary-key: run show dhcpv6 server binding detail Session Id: 24 Client IPv6 Address: 2a22:f440:a:3::15/128 Lease Expires: 2010-02-17 13:54:25 EET Lease Expires in: 676...
View ArticleRe: Single-session dual-stack subscribers - how it works?
And finally working config is dhcpv6 { overrides { delete-binding-on-renegotiation; dual-stack DS; } group ipv6-stacked-subscribers { interface demux0.0; } } pool-match-order { ip-address-first; }...
View ArticleRe: Single-session dual-stack subscribers - how it works?
And a little appendix for the post above:You will brake your DUAL-STACK if you change CLIENT DUID. So if your client has mac address of c4:12:f5:d4:aa:eb and DUID...
View ArticleSubscriber management and Framed-Route
And again hello everyone )I`m trying to make Framed-Route attribute work.My subscriber looks like this:ge-0/0/4:4020-3000 Auth-Type := Accept Framed-IP-Address := "10.200.4.2", Framed-IP-Netmask :=...
View Article