Re: cut static to ospf area 0
Hi Ashvin,thanks for the answer. For now I cannot touch the Cisco device since they are the Core.I tought there is a way for configure a filter on MX that say: the route to x.x.x.x/xx have not to be...
View ArticleRe: cut static to ospf area 0
Hi, Similar question here.Because external routes have an interarea flooding scope, policies are applied globally and external routes are exported to all areas/interfaces under ospf. IMO, this is not...
View ArticleRe: How to advertise routes to bgp peer from another vrf interface?
Hi We already changed topology. So the issue have been solved. Thank you all
View ArticleRe: Different routing-instance interface in same router can communicate ?
We already changed topology. So the issue has been solved. Thank you all
View ArticleDo you think what is difference of two commands on bgp configurations
Do you think what is difference for following two bgp configurations? Thank you Sometimes I see command : set routing-instances DOC protocols bgp group ABC neighbor 19.9.9.9 local-address 66.3.3.3 and...
View ArticleDo you think this command is correct ?
Do you think following command are correct ?I know if 20 and 30 are replaced by 10, they would be correct. Thank you set policy-options policy-statement IMPORT_POLICY term 10 from prefix-list ABCset...
View ArticleRe: Do you think what is difference of two commands on bgp configurations
I see only one command here I beleive , your query is with or without local- addres configuration "If you omit the local-address statement, the expected source of BGP update messages is based on the...
View ArticleRe: Do you think this command is correct ?
It is incorrect as it is ,as each are different terms and cannot be evaluated individually
View ArticleRe: Do you think what is difference of two commands on bgp configurations
I mean sometime they do not use the command "set routing-instances DOC protocols bgp group ABC neighbor 19.9.9.9 local-address 66.3.3.3" when they configure bgp. Do you think it is correct? In other...
View ArticleRe: Do you think what is difference of two commands on bgp configurations
If your EBGP speaker is your direct interface(peering with direct interface ) , mentioning without local-address is correct. if you are having a peering with loopback address of your neighbor then...
View ArticleRe: Do you think what is difference of two commands on bgp configurations
You are right. Thank you so much
View ArticleWhat commands are correct for "set policy-options prefix-list xxx"
Hi This is a ipv6 prefix-list /64Which commands is correct for the following? Thank you set policy-options prefix-list 2312:2888:ff0:dddc:e4e:23:ff2:1set policy-options prefix-list...
View ArticleRe: What commands are correct for "set policy-options prefix-list xxx"
Hi, This will generate individual prefix-lists for each and they will be empty.I guess you are looking for something like:set policy-options prefix-list NAME 2312:2888:ff0:dddc:e4e:23:ff2:1set...
View ArticleRe: Do you think this command is correct ?
Hi, I believe the policy-statement is a valid one, however may not be what you require.Junos will evaluate the policy as follows:term 10: Prefixes in prefix-list ABC will be matched and no action ->...
View ArticleRe: Do you think this command is correct ?
I beleive the context of the question was whether the above said policy statement will set community WXA for prefixes from prefix list WXA and accept the same. "It is incorrect as it is ,as each are...
View ArticleRe: What commands are correct for "set policy-options prefix-list xxx"
You are right. Thank you
View ArticleWhy the ping command is not complicated?
HiWhy the ping command is not complicated? I have to use the below command to ping.Otherwise it cannot work. The destination and source are connected directly. Anyone can give some suggestion? Thank...
View ArticleRe: Why the ping command is not complicated?
Hi, Its possible to source the ping from different interfaces. From that command you are sourcing the ping from ge-1/1/3 and bypassing the routing table for this destination.Can you check for the route...
View ArticleRe: Multi-VLAN VPLS instance and VLAN translation
Hi, Did you figure this out in the end.... I currently am trying to migrate a connection buit on a Cisco switched network which has qinq where the customers run what ever internals vlans they need to...
View Article