Re: Port Mirroring On MX Platform
I have configured it remotely, seems to be working, but will know for sure once I am on site. Will let you know. this static arp is entry is what seemes to be the trick
View Articlequery on MPLS ping
Hi all, Good day! I need a help on the command ping mpls ldp 3.3.3.3 detail. The output of this command gives me the following output. Request for seq 1, to interface 329, label 299776, packet size...
View ArticleRe: query on MPLS ping
Hi , Answers inline Reply for seq 1, return code: Egress-ok, time: 0.551 ms <<<<< is this the round trip time Yes this is round trip time , You are getting the Echo reply from...
View ArticleRe: query on MPLS ping
Hi, My understanding is as follows: Local transmit time: Timestamp on ingress PE at which echo request was generated Remote receive time: Timestamp on egress PE at which echo request was...
View ArticleRe: MC-LAG back to back
Hi Doug, I am trying to build a back to back mc-lag for testing purposes. I wonder if you could share the mc-lag related configuration in your set up. when we configure mc-lag only on a pair of...
View ArticlePreferring LDP Path instead of RSVP Path
Just trying to see if there is any way to do this. I have this topology LDP LDPoRSVP LDP [PE1]<---->[P1]<----------->[P2]<----->[PE2] |...
View ArticleRe: Preferring LDP Path instead of RSVP Path
Hi, Other than changing the protocol level preference, I believe the preference can be altered for a specific RSVP LSPset protocols mpls label-switched-path xxxx preference x.Cheers,Ashvin
View ArticleRe: Preferring LDP Path instead of RSVP Path
Thanks a lot. That might work. I will take a look.
View ArticleRe: IP SLA equilvilent for Junos
Hi, the trick is that only one RPM probe is active at the same time. So, you have to include deactivate services rpm probe A activate services rpm probe B as change commands in policy failover and...
View ArticleClik here to view.
Modify Interface BW after failure
Hi All, Not sure if this is the correction section to post.Target: decrease the bandwidth of interface if-C in case interface If-A or If-D is down. I do not want to know how, but simply have a...
View ArticleRe: Modify Interface BW after failure
Hi, Sounds like an event policy would handle this, or if a more complex solution is required then an event policy/event-script might be in order. Regards,Andy
View ArticleRR and BGP group
Dear Sirs I have trouble understanding the cluster concept.below is my bgp group root@vMX2> show bgp group Group Type: Internal AS: 1111 Local AS: 1111 Name: IBGP-STD Index: 0 Flags: <>...
View ArticleSharing an ARIN block amongst a couple regional sites
As we all know ipv4 exhaustion is a real thing. Our company has already acquired a /24 subnet from ARIN. We are now opening a new datacenter to distribute load across a regional area. The fight with...
View ArticleRe: RR and BGP group
Hi, please share the configuration and "show bgp neighbor" output.
View ArticleRe: Sharing an ARIN block amongst a couple regional sites
Hi, If the ISPs are common on both sites, you could announce separate /25 with no-export community or both /25s with different MED + no-export and the aggregate /24 as default. This would allow...
View ArticleRe: Back Up Routing Engine is initiating ftp sessions to save the...
Hi, please share below output from both routing-engine "show system configuration archival "
View ArticleRe: RR and BGP group
Hi adwivedi root@vMX2> show configuration | no-more ## Last commit: 2016-09-30 18:18:21 UTC by rootversion 14.1R1.10;system { host-name vMX2; root-authentication { encrypted-password...
View Article