Re: EVPN Configuration
I also assume that under bgp group AS....you also configured at least one neighbor regards alexander
View ArticleClik here to view.
Re: EVPN Configuration
Hello, Thanks for your answer.I'll give you the result of the command in few hours. On my lab, I use Cisco router like RR. Is it possible to have an impact ?If I use EX4600 like P router, can I achieve...
View ArticleRe: EVPN Configuration
the EX4600 as P-router that is OK, as long as there is a LSP ( label switch path)regarding RR, you have to check ( show bgp summary on the MX or show bgp neighbor an look if the EVPN family is...
View ArticleRe: Why is the vrrp not running?
1. Change your em0 addresses to some other subnet2. Bridge irb.0 between your two routers with a cable 3. Upgrade to something higher than 12.1R1
View ArticleRe: EVPN Configuration
Hi, You could also check if the BGP EVPN table is populated on the PE:show route table bgp.evpn.0Cheers,Ashvin
View ArticleCOS through L2 switch
Hi all! I am fairly new cos so what I am trying to do might not make sense, here it goes. I have the following lab topology fe-0/0/1...
View ArticleRe: COS through L2 switch
Hello, This article might help you with the same: https://kb.juniper.net/InfoCenter/index?page=content&id=KB27218 Marking the traffic through 802.1p allows it to be treated as a background priority...
View ArticleRe: COS through L2 switch
Hi Folks,Please find few pointers on Junos OS Class of Service Configuration,https://www.juniper.net/documentation/en_US/junos12.3/information-products/pathway-pages/cos/index.html Hi Folks,Please...
View ArticleRe: Why is the vrrp not running?
Hi Folks,This will help us with some insight on the observation, Logs/Traceoptions: set protocols vrrp traceoptions file vrrp files 10 size 50m set protocols vrrp traceoptions flag general set...
View ArticleRe: How to confirm traffic go through fxp0 interface
Hi Folks,The below command also shows the programming of the same, show route forwarding-table destination 10.10.128.8/32 extensive Always you can do traceroute and monitor traffic, provided it is a RE...
View ArticleRe: how to manage 15mbps shared bandwidth
Hi Steve, Thinking of doing flow export for this interface traffic. wanted to know if i will need license for the jflow on MX960 with 13.3R6. Regards,sheeel.
View ArticleEffect of firewall filter on MX interface
Hi All,i have the below filter config: -re0# show firewall family inet filter GOOGLE-TEST term FROM-GOOGLE { from { source-prefix-list { GOOGLE; } } then policer 30MB-POLICER; } term OTHER-TRAFFIC {...
View ArticleRe: Effect of firewall filter on MX interface
try to configure filter with interface-specific option .
View ArticleRe: Modifying routing table with ip-monitoring
I do not think it will work - as it is not possible to use no-retain and other modifiers in the context of ip-monitoring.Basically - this setup will not even commit. I have solved a simmilar problem...
View ArticleRe: COS through L2 switch
Hi, I would suggest looking at the classifiers applied on fe-0/0/1 on SRX and correlate that the traffic is entering the correct forwarding class on SRX2:show class-of-service interface fe-0/0/1Also,...
View ArticleSRX300 - Latest Release - Multiple VRFs, Source NAT, Can't Access Anything...
Source NAT is translating, but dropping everything attempting to access the outside. Two DHCP pools in their own VRF, each using a different public IP. Clients can connect, but can't get outside. Can't...
View ArticleRe: SRX300 - Latest Release - Multiple VRFs, Source NAT, Can't Access...
As for a network map: 4200SRX300 WLC2200Wireless Mesh Network
View ArticleRe: SRX300 - Latest Release - Multiple VRFs, Source NAT, Can't Access...
Hello, I see that Vendors come to SRX300 on irb.453 and Guests come on irb.454. On same interfaces, address assignment also happens as per configuration. Are irb.451 and irb.452 part of another VR or...
View ArticleRe: SRX300 - Latest Release - Multiple VRFs, Source NAT, Can't Access...
I've completely removed the virtual-routers from the equation to try and simplify this and figure it out as quickly as possible, but you were probably right about the route leaking back into inet.0....
View ArticleRe: how to manage 15mbps shared bandwidth
Hi Folks,Please refer the below pointers... https://www.juniper.net/documentation/en_US/junos/topics/reference/general/mx-series-software-license-features.html
View Article