Hello All,
I have two EX9200's directly connected (P+PE/CE in one) with MPLS and the EVPN overlay protocol enabled.
On EX9200-1 i have an external connection (ge-0/0/2) with several multicast sources. For this PIM and IGMP is enabled.
Multicast routing works fine. Hosts in a different VLAN (irb/vlan 545) can recieve multicast groups (audio/video) fine
Because we run EVPN, we also have irb/vlan 545 on ex9200-2. I also want that segment to be able to recieve the multicast groups.
For this i have enabled mvpn and setup a tunnel-provider connection between the EX devices using this information:
Only change is that i use ISIS instead of OSPF and LDP instead of RSVP.
IGMP join packets from devices attached to EX9200-2 are recieved by the RP (EX9200-1) and mVPN is advertising all available groups to EX9200.
Stuff should work but it doesn't.
Config EX9200-1
#show configuration routing-instances HOSTING-VRF protocols
pim {
}
rp {
local {
address 10.10.254.11;
}
}
interface ge-0/0/2.0 {
mode sparse;
version 2;
}
interface lo0.1 {
mode sparse;
version 2;
}
interface irb.545 {
mode sparse;
version 2;
}
}
mvpn {
route-target {
import-target {
target target:100:1010;
}
export-target {
target target:100:1010;
}
}
}
#show configuration routing-instances HOSTING-VRF provider-tunnel ldp-p2mp;
# show configuration protocols igmp
interface ge-0/0/2.0 {
version 3;
}
interface irb.545 {
version 3;
Config EX9200-2:
#show configuration routing-instances HOSTING-VRF protocols
pim {
rp {
static {
address 10.10.254.11;
}
}
interface lo0.1 {
mode sparse;
version 2;
}
interface irb.545 {
mode sparse;
version 2;
}
}
mvpn {
route-target {
import-target {
target target:100:1010;
}
export-target {
target target:100:1010;
}
}#show configuration routing-instances HOSTING-VRF provider-tunnel ldp-p2mp;
#show configuration protocols igmp
Results:
EX9200-1
#show route table HOSTING-VRF.mvpn.0
7:10.10.254.5:9:12345:32:20.20.174.14:32:224.1.4.26/240
*[MVPN/70] 1w0d 03:00:53, metric2 1
Multicast (IPv4) Composite
[PIM/105] 1w0d 03:00:53
Multicast (IPv4) Composite
#show mvpn neighbor instance-name HOSTING-VRF MVPN instance: Legend for provider tunnel S- Selective provider tunnel Legend for c-multicast routes properties (Pr) DS -- derived from (*, c-g) RM -- remote VPN route Family : INET Instance : HOSTING-VRF MVPN Mode : SPT-ONLY Neighbor Inclusive Provider Tunnel 10.10.254.4 LDP-P2MP:10.10.254.4, lsp-id 16777217 MVPN instance: Legend for provider tunnel S- Selective provider tunnel Legend for c-multicast routes properties (Pr) DS -- derived from (*, c-g) RM -- remote VPN route Family : INET6 Instance : HOSTING-VRF MVPN Mode : SPT-ONLY Neighbor Inclusive Provider Tunnel 10.10.254.4 LDP-P2MP:10.10.254.4, lsp-id 16777217
EX9200-2:
#show route table HOSTING-VRF.mvpn.0
5:10.10.254.5:9:32:80.79.37.230:32:224.1.4.232/240
*[BGP/170] 1w2d 00:12:11, localpref 100, from 10.10.254.5
AS path: I, validation-state: unverified
> to 10.10.254.194 via ae0.0#show mvpn neighbor instance-name HOSTING-VRF MVPN instance: Legend for provider tunnel S- Selective provider tunnel Legend for c-multicast routes properties (Pr) DS -- derived from (*, c-g) RM -- remote VPN route Family : INET Instance : HOSTING-VRF MVPN Mode : SPT-ONLY Neighbor Inclusive Provider Tunnel 10.10.254.5 LDP-P2MP:10.10.254.5, lsp-id 16777217 MVPN instance: Legend for provider tunnel S- Selective provider tunnel Legend for c-multicast routes properties (Pr) DS -- derived from (*, c-g) RM -- remote VPN route Family : INET6 Instance : HOSTING-VRF MVPN Mode : SPT-ONLY Neighbor Inclusive Provider Tunnel 10.10.254.5 LDP-P2MP:10.10.254.5, lsp-id 16777217
Does anyone ever get this setup to work?