Re: Force same as-path on default route from 2 ISPs
Thanks for the suggestion, it is indeed a good idea if they are willing to do so. I'm not sure if there was an official way to achieve what I wanted, but it would be a good alternative. The other...
View ArticleRe: VPN Clien-to Site
Hello,Are you seeing any error / drops for the packet ? Can you paste the relevant outputs to check the behavior.RegardsVatsa
View ArticleRe: What is the MX LACP and ECMP default load balancing method?
hmm that article reads as if symmetrical load balancing is an option, rather than the default
View ArticleRe: Force same as-path on default route from 2 ISPs
Hello,Ok, let's reverse the situation - can Your exotic device handle 0/1 + 128/1 with equal AS_PATHs?You can add 0/1 + 128/1 as aggregate discards with NULL/custom AS_PATH based on specific BGP routes...
View ArticleRe: OSPF LSA 1 and JNCIS-ENT
http://www.juniper-ie.com/forum/29-jncie-ent-written-exam-lab-exam/I am really excited to start new journey lets join together and we can gain more knowledge what is there in the lab exact model of...
View ArticleRe: VPN Clien-to Site
Hi Vatsa! thank you for the tips! See that please.The input of the packets is being done by interface ge-0/0/0.0 while the output by another (ge-0/0/2.0). Is that correct?If not, how can I solve it?...
View ArticleClik here to view.
Re: Force same as-path on default route from 2 ISPs
That would actually be much simpler! I'll give that a test and confirm, but it should indeed work very well! And the device is not that exotic, unfortunately. Just a commercial LB stuck with ZebOS...
View ArticleRe: Force same as-path on default route from 2 ISPs
Hello,Assuming this ZebOS can handle 0/1+128/1 with equal AS_PATHs, You may need to deny installation of 0/1+128/1 in the FIB to prevent blackholing in case one of Your routers loses its ISP...
View ArticleRe: JNCIS-ENT exam format
http://www.juniper-ie.com/forum/29-jncie-ent-written-exam-lab-exam/I am really excited to start new journey lets join together and we can gain more knowledge what is there in the lab exact model of...
View ArticleRe: JNCIS-ENT tomorrow exam
http://www.juniper-ie.com/forum/29-jncie-ent-written-exam-lab-exam/I am really excited to start new journey lets join together and we can gain more knowledge what is there in the lab exact model of...
View ArticleRe: Force same as-path on default route from 2 ISPs
Thanks for that head's up. It turns out that it *somewhat* works. Officially, it works well at this point and it does install both aggregate routes in the device's routing table. The really weird thing...
View ArticleRe: FBF, "then next-interface" action, forwards traffic with dynamic IGP on...
The route for the given IPv4 or IPv6 address has to be present in the routing table for policy-based routing to take effect. Similarly, the route through the given interface has to be present in the...
View ArticleClik here to view.
Re: Force same as-path on default route from 2 ISPs
Hello, Siegfried wrote: For some reason, it doesn't want to accept the 128.0.0.0/1 route, as when it's the only route advertised by one of our routers, it does't install anything.Yeah, I recall seeing...
View Article"show route 10.10.10.0/24 detail"
Hi Can we know whether the route 10.10.10.0/24 is advertised from the below command? Thank you "show route 10.10.10.0/24 detail"
View ArticleClik here to view.
Re: "show route 10.10.10.0/24 detail"
Providing I understand your query correctly then yes - If you look out for "Announcement bits" it indicates that the route is being consumed by a protocol. If you don't see the "Announcement bits"...
View ArticleRe: FBF, "then next-interface" action, forwards traffic with dynamic IGP on...
Hi,lyndidon,thank you for your reply. Adding routing instance does not work (the packets are still blackholed).Anyway, routing instance is optional, so just "then next-interface ge-x/x/x" should work....
View ArticleRe: FBF, "then next-interface" action, forwards traffic with dynamic IGP on...
can you post your config - sanitized if needed. fbf is used in combination with a routing instance. can you show all the relevant RI config?
View ArticleRe: "show route 10.10.10.0/24 detail"
Also if you look at this article, you will note the source of the routehttps://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/show-route-detail.html#jd0e1789e.g.static,...
View ArticleRe: FBF, "then next-interface" action, forwards traffic with dynamic IGP on...
config: interfaces { ge-0/2/0 { enable; unit 0 { family inet { filter { input pbr_filter; } address 1.1.1.1/24; } } } ge-0/2/1 { enable; unit 0 { family inet { address 3.3.3.1/30 { arp 3.3.3.2 mac...
View ArticleRe: FBF, "then next-interface" action, forwards traffic with dynamic IGP on...
So the next-ip ri statement works!!The interface placed in rins1 instance-type virtual-router basically isolates it from inet.0, but it still shows up in inet.0 with a higher preference?? How did that...
View Article