Quantcast
Channel: All Routing posts
Browsing all 8688 articles
Browse latest View live

Re: FBF, "then next-interface" action, forwards traffic with dynamic IGP on...

next-ip statement worked from the beginning.The question is why next-interface works only when IGP is present on interface.  Regarding configs, route with preference 25 is from another setup.  current...

View Article


which one is prefer detour or secondary standby when ingress and PLR is same...

Hi ExpertI have some question about LSP switchover which one is prefer detour or secondary standby  when ingress and PLR is same router ?

View Article


MX960: 2x 250V AC Low Power Modules enough?

Hey all, We have a MX960 with 4x AC 250V Low Power Supplies. (3x1700W + 1 Redundancy)Actual power allocated is 2695W. All power supplies share the load in zone0. During maintenance window we need to...

View Article

srTCM and trTCM mapping to forwarding class

would like to know the PLPs set by the srTCM and  trTCM are mapped to the forwarding class, as we do not call theforwarding call in the  policer of firewall filter

View Article

Re: MX960: 2x 250V AC Low Power Modules enough?

We run with redundant 4 x high capacity power supplies so I've not done this directly.  But the documentation seems pretty clear that when you use the normal capacity AC power supplies three are...

View Article


BGP & BFD over a LAG

Hello, If I'm running an BGP session over a LAG (let's say a 2*10G LAG) and I configure BFD for the BGP session will the BFD packets traverse the same member-link of the LAG as the eBGP packets? (I'm...

View Article

Re: "show route 10.10.10.0/24 detail"

Very good. Thank you

View Article

What is difference between prefix-list-filter and prefix-list?

Hi Please see the below. What is difference between prefix-list-filter and prefix-list ? Thank you set policy-options policy-statement IMPORT_P term 10 from prefix-list-filter RFC orlongerset...

View Article


Re: What is difference between prefix-list-filter and prefix-list?

Please refer the below link; if you face any challenge understanding the concept please let us know! https://www.juniper.net/documentation/en_US/junos/topics/example/policy-prefix-list.html 

View Article


Re: BGP & BFD over a LAG

bfd sessin packets and bfd session packets are independent. And , yes, it is possible that the BFD packets will be sent over the other member-link. 

View Article

Re: srTCM and trTCM mapping to forwarding class

Check the PLP mapping details as aligned with the classifier you have configured....

View Article

Re: BGP & BFD over a LAG

Hi, I'm guessing you meant to write "bgp session packets and bfd session packets are independent" ..? So, from your answer (many thanks for which, by the way) there is a possible scenario whereby the...

View Article

Re: What is difference between prefix-list-filter and prefix-list?

Hi, In short using prefix-list is an exact match of prefixes in the prefix-list while prefix-list-filter allows further filtering such as 'orlonger'.set policy-options policy-statement IMPORT_P term 10...

View Article


Re: BGP & BFD over a LAG

Hello,Velociraptor wrote:Hi,<skip> there is a possible scenario whereby the BGP session could traverse one member-link of the LAG and the BFD session packets could traverse the other member-link...

View Article

Re: BGP & BFD over a LAG

Thanks Alex, I assume that μBFD cannot be associated with a BGP session though?  - So I guess you're saying configure it at L2 on each member-link because it cannot be associated with the BGP routing...

View Article


Re: BGP & BFD over a LAG

Hello,There is no direct signaling between uBFD and BGP (or other L2 protocols), see RFC 7130 section 4.https://tools.ietf.org/html/rfc7130#page-6Only indirect signaling via "minimum-links" knob is...

View Article

Re: BGP & BFD over a LAG

Great - thanks

View Article


Re: MX80 or at the end just a MX5

We were an early buyer of the MX80-5G. This is basically an MX5, but before they were shipping actual MX5 hardware. It is essentially an MX80 with 'honor-based licensing'. There are no restrictions on...

View Article

Re: What is difference between prefix-list-filter and prefix-list?

Thank you Ashvin

View Article

Re: MX80 or at the end just a MX5

Good Morning together. @manoj.karmacharya I also thought about that but just wanted to know if there is any possibility to get that information through any router output. @python I know that thread but...

View Article
Browsing all 8688 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>