Re: configure static P2MP LSP for MVPN !
I think you are missing "provider tunnel" level in your vrf configuration. rsvp-te { ## ## Warning: Referenced point-to-multipoint static LSP does not exist ## static-lsp P2MP-TEST; should be...
View ArticleClik here to view.
Re: configure static P2MP LSP for MVPN !
Hi,Sorry because of my missed configuration, [edit routing-instances black]lab@PE-1# show instance-type vrf;interface ge-0/0/2.2;interface lo0.41;route-distinguisher 45543:101;provider-tunnel {...
View ArticleRe: configure static P2MP LSP for MVPN !
That all looks correct. Do you have tunneling services activated on the fpc/pic combination invovled? chassis { fpc 0 { pic 0 { tunnel-services { bandwidth 1g; } } } }
View ArticleRe: configure static P2MP LSP for MVPN !
Hi,I have tunneling services activated.lab@PE-1# show chassis fpc 0 { pic 0 { tunnel-services { bandwidth 1g; } }} I try to do this with the real MX960, but Junos gives the same message.
View ArticleRe: configure static P2MP LSP for MVPN !
I am able to clear this error in the lab on a MX480 running Junos 13.3 --- JUNOS 13.3R10.2 MX480# show protocols mpls ..... label-switched-path TO-PE-2 { to 3.3.3.3; optimize-timer 180; p2mp P2MP-TEST;...
View ArticleRe: configure static P2MP LSP for MVPN !
Thanks for ur help,The problem was fixed. Because PE-1 is the logical system of the vMX, so it did not allow me to commit. I configured PE-1 to be the main router, it worked perfectly !And in the real...
View ArticleRe: Is it possible to test full LAB NG-MVPN in logical-systems ?
It is possible, I used the the vMX on VMware Workstation (to make a full LAB NG-MVPN,This is the good pratice to understand how it work, you can use the mcast.exe to create the Multicast source.
View ArticleRe: configure static P2MP LSP for MVPN !
Thanks for the update. There are some features that don't work with LSYS. But in this case I wonder if the LSYS has a separate protocol mpls hierarchy separate from the root/master routing instance.
View ArticleRe: configure static P2MP LSP for MVPN !
I'm not sure,But, before i changed my lab, i had created the same p2mp in the main vMX (Of couse, this LSP is down because the main vMX in my lab just a CE router, so the mpls did not run), and the...
View ArticleLoad balancing in MPLS VPN environment
Hi All, I have 4 devices in my configuration running MPLS to distribute VPN route information. 2x router, 2x switch.The routers have internet access and advertise a default route to the switches:...
View ArticleRe: Load balancing in MPLS VPN environment
Hi. It might be load balanced already with LB policy applied but may not be evident when looking at the routing table.You could check:show route forwarding-table table OUTSIDE-VRF Hope this helps....
View ArticleRe: Load balancing in MPLS VPN environment
It does not look like it unfortunatly. user@switch> show route forwarding-table table OUTSIDE-VRF Routing table: OUTSIDE-VRF.inet Internet: Destination Type RtRef Next hop Type Index NhRef Netif...
View ArticleRe: Load balancing in MPLS VPN environment
Hi, Could you check the routes in inet.3 and forwarding-table for the BGP protocol next-hops: show route table OUTSIDE-VRF 0.0.0.0 extensive | match "Protocol next hop"show route table inet.3 x.x.x.x...
View ArticleCGNAT PBA with MS-MPCs
We need some help, more especific best practices for the next command lines in the CGNAT configuration with PBA in the new MS-MPCs in the router Juniper MX960 -syslog configuration- service interfaces-...
View ArticleRe: Load balancing in MPLS VPN environment
Thanks for thinking with me user@switch> show route table OUTSIDE-VRF 0.0.0.0 extensive | match "Protocol next hop" Protocol next hop: 1.1.1.1 Protocol next hop: 1.1.1.1 Metric: 10 Protocol next...
View ArticleRe: NAND | Medium Errors
I currently have 2 ACX1100's doing the same thing: (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 90 17 0 0 20 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error(da0:umass-sim0:0:0:0): SCSI...
View ArticleRe: CGNAT PBA with MS-MPCs
Hello,I suggest You contact Your nearest Juniper Account manager/Systems Engineer and inquire about Juniper Professional Services (PS). Juniper PS can design, build & test the MS-MPC CGNAT solution...
View ArticleRouting instance editing
HiI have configured a routing instance with the RD defined within the instance config and the RT (community) configured as part of the policy statement bound to the instance. What I found was that the...
View ArticleRe: Routing instance editing
Which type of routing instance are you trying to configure? From the descriptoin I assume it is a vrf for layer 3 vpn. I am also confused from the description. Are you just trying to change the value...
View Article