Clik here to view.
OSPF-ISIS redistribution confusion!
Hi, I was following JNCIE-SP boot camp tasks and I stuck in one task for a while and couldn’t figure out how it goes. First of all, I draw this simple diagram to elaborate the issue simply as much as I...
View ArticleClik here to view.
ACX PTP FDD AND TDD
ITU-T G.8265.1 FDD profile is supported on ACX series, so Frequesncy Sync is possible using PTP. But niether ITU-T G.8275.1 nor ITU-T G.8275.2 TDD profiles are supported on ACX currently. So is there a...
View ArticleNot have output when connect on Console port RE0?
Hi all, i facing weird beahavour. Suddenly when i console to RE0 then not output display. But if i change to console on RE1 then have output. It's not have issue to access RE0 from RE1. I know it can...
View ArticleRe: OSPF-ISIS redistribution confusion!
Hi, "Create policy to export this aggregated routes to ISIS, without matching the protocol, because as they mentioned either R3 or R5 will receive the route from other router (R3/R5) from ISIS with...
View ArticleRe: Not have output when connect on Console port RE0?
Is re0 still master?Can you ssh to management?Any logging that seems related? Try logging into re0 from the re1 connection request routing-engine login re0
View ArticleRe: Not have output when connect on Console port RE0?
Hi Spuluka, It no issue to login RE0 from RE1. RE0 is master. The issue was when i connect direct console cable into console port on RE0. Thanks
View ArticleRe: Not have output when connect on Console port RE0?
Hi Kronicklez, This seems to be an issue with the console port which can be resolved only via reboot or reseat. I don't think there is any other way to get the console working in this case. You can...
View ArticleRe: ACX PTP FDD AND TDD
Hi,To configure ACX PTP slave clock: Configure the clock mode:[edit protocols ptp]user@host# set clock-mode (boundary | ordinary) Configure the slave clock.[edit protocols ptp]user@host# edit...
View ArticleRe: OSPF-ISIS redistribution confusion!
Thanks Ashvin! This is really what I was thinking about, but what is written and elaborated in boot camp is something different which makes me more confused and stuck on it for long time.
View ArticleRe: ACX PTP FDD AND TDD
Hi Rahul, Thanks for the contribution. What you have given is FDD profile. I was reffering the TDD profiles. Smartm.
View ArticleRe: OSPF multiple instances per link
I did some digging and it looks like they were talking about https://tools.ietf.org/html/rfc6549 OSPFv2 Multi-Instance Extensions.... This document defines the OSPFv2 Instance ID to enable separate...
View Articlenapt-44 on MX240
Hello all,Im trying to make a overload nat, so to nat a range toward a single outside ip on a router MX240, it has the card DPCE 20x 1GE + 2x 10GE . When pinging a public ip with source the range to...
View ArticleRe: napt-44 on MX240
For overload nat on MX you should use MS-DPC/MS-MIC/MS-MPC card/mic. Also you can use inline 1:1 NAT but only on MPC line cards
View ArticleClik here to view.
Re: napt-44 on MX240
Hello, thank you, so here there is not any MIC card installed as i see ? Thank you
View ArticleRe: napt-44 on MX240
Hello, another info, i have these cards installed, so there is not any possibility to make overload NAT? lot 1 Online DPCE 20x 1GE + 2x 10GE R PIC 0 Online 10x 1GE(LAN) PIC 1 Online 10x 1GE(LAN) PIC 2...
View ArticleRe: napt-44 on MX240
On Juniper routers, you can configure NAT either with the sp interface(adaptive services interface), ms interface(multi services interfaces) or with the si interface(services-inline interface). These...
View ArticleRe: napt-44 on MX240
Nestiern, No, you are not able to configure a NAT with those cards. To configure an inline NAT 1:1 you need an MPC card and to configure an overload NAT you will need a multiservice card or...
View ArticleRe: napt-44 on MX240
Thank you all for your help, it is very useful, i really appreciate, thanks
View Articleerror: Standby is not synchronizing ?
Hi All, When i'm do show system switchover on backup RE then i get this error "error: Standby is not synchronizing". Is there anyone know what mean this error. GRES & NSR already configured....
View ArticleRe: error: Standby is not synchronizing ?
show output of command show task replication.
View Article