Re: use a specific lsp for a l3VPN when LDP is the common protocol
Hi Niklas, Great.. [KUDOS PLEASE! If you think I earned it!If this solution worked for you please flag my post as an "Accepted Solution" so others can benefit..]
View ArticleRe: Static RP election in multicast
I guess, it depennds on how you configure static RP address on other routers in your network. root@R2# set protocols pim rp static address 10.220.1.4 group-ranges 224.0.0.0/4[edit]root@R2# set...
View ArticleRe: Age of Juniper devices by Serial Number
Hi spuluka, Ugh, I feel quite stupid now. So that's what the big sticker means on top of the device :-)The problem now is how I'm going to check the manufacture date of the devices while they're in...
View ArticleSubscriber management VLAN ranges limit
Hello everyone, At my company we're a heavy user of the subscriber management feature with both DHCP and PPPoE. All works well, except that since this week, we're having issues establishing both DHCP...
View ArticleRE-S-2000 with 16.1 R5 ??
Hi,Can I install 16.1R5 on RE-S-2000 with 1GB flash ?All technical documentation say yes but I have a dubb and I want to be sure.My configuration is MX240 with RE-S-2000 and SCB.Thanks !Kind reagrds,...
View ArticleFirewall filters not working ..?
Hello all,Hoping for some help from the experts! I have a virtual-router configured on an EX4200 [JunOS 11.4R5.5] and I have 2 RVI's as member interfaces (each RVI has an associated l3-interface,...
View ArticleRe: use a specific lsp for a l3VPN when LDP is the common protocol
Hi, You can have this working with the "no-install-address" but specifying another "install <alternative-next-hop>" in the LSP.This would require a secondary loopback IP or a fictituous next-hop...
View ArticleRe: Firewall filters not working ..?
If i understand correctly your filrewall filters are applied as output meaning it supposed to drop traffic leaving the subnet to wards the other subnet. how about you apply them in the input direction...
View ArticleRe: Null0 Interface in Juniper ?
Hi, I would like to restrict some routes going out of my ABR router. Is it possible ? For example, In area 0, I have 10 routes. And these ten routes are going into area 1 as LSA1 routes. So, on a...
View ArticleRe: Firewall filters not working ..?
Hello,What You see is expectedhttps://www.juniper.net/documentation/en_US/junos/topics/concept/firewall-filter-ex-series-planning.htmlNote: Egress firewall filters do not affect the flow of locally...
View ArticleRe: L2TP MX240 LNS
Thank you Mayar, I have stumbled across an issue with regards to this configuration though (although I know it is only a sample).... The line near the end that says: "set aaa-access-profile...
View ArticleRe: Null0 Interface in Juniper ?
Probably better to post this as its own thread, rather than adding to a years-old thread on an unrelated topic. Anyway, you have some incorrect information here. Type 1 LSAs don't go from area to area;...
View ArticleRe: L2TP MX240 LNS
Hi, You can configure simple test profile like below in case radius authentication is not required. labroot@ERX-MX960-NS-1# set access profile TEST-ACCESS-PROFILE authentication-order none...
View ArticleRe: Subscriber management VLAN ranges limit
Hi, Not sure the version in question. Please note, from 15.1 i.e next generation subscriber-management release there is no limit to vlan-range. labroot@jtac-mx480-r2031_C# show interfaces ae0 | match...
View Articlecan i map 7 channelized stm1s to STM16 port on MX960?
Hi All, I have a requirement of terminating 7 STM1s on STM16 port of MIC-3D-8OC3OC12-4OC48 MIC. the STM1s are channelised. The 7 STM1s are to be bundled to make up 1 gig internet upstream capacity we...
View ArticleRe: Firewall filters not working ..?
Hi Alex, So given this statement: Note: Egress firewall filters do not affect the flow of locally generated control packets from the Routing Engine.Does it mean that the firewall is not working only...
View ArticleRe: Firewall filters not working ..?
Hello,To end the nitpicking once and for all:ANY traffic generated by RE on EX3K/4K series products passes through EX3K/4K egress FW filters unaffected.I hope this clarifies.HTHThxAlex
View ArticleHas anyone seen this error message on the logs? fpc7...
Seeing this error repeated on the logs. Can anyone identify this error? fpc7 ppe_img_ucode_get_thresholds niter mismatch at index 234 loops 28730 niter 28729
View ArticleRe: Has anyone seen this error message on the logs? fpc7...
Hi, Is it MX box?Are you using jflow?what's the flow-table size configured and which chassis mode are you running on the box? Regards
View Article