Re: ISIS Export Policies (Policy-Options)
Hi Clive, Why you static route on SRX1500? SRX1500 should advertise the subnet via ISIS and LNS should have isis route for 2a05:d840:0050::/48. SRX1500 and radius is P2P. All you need is return route...
View ArticleClik here to view.
Re: ISIS Export Policies (Policy-Options)
Hi Rahul, Please accepy my apologies as I had been reliably informed by the Centos engineer that a default gateway had been applied. I did quesiton him several times to check. The last time he informed...
View ArticleRe: ISIS Export Policies (Policy-Options)
Perfect !! Please confirm if PPP client is coming up after making the authentication none. I need authd logs and wireshark to troubleshoot the radius issue. Regards,Rahul N
View ArticleRe: ISIS Export Policies (Policy-Options)
Hi Rahul, It can't be the RADIUS (I don't think) as the issue still exists.... it certainly seems to be an IP issue..... Here is the Cisco Debug from the PPP Client: *Mar 4 21:44:32.300: Se0/0 PPP:...
View ArticleRe: ISIS Export Policies (Policy-Options)
Sorry Rahul..... It won't let me upload the Wireshark.... do you have an e-mail address I can send it to please?
View ArticleRe: ISIS Export Policies (Policy-Options)
Hi Clive, Please share the PCAP to understand the issue. Regards,Rahul
View ArticleRe: Load balancing with LDP with RSVP LSPs in the middle
Hello, Did you find an answer to your question? I believe it should use RSVP due to better preference (7)
View ArticleRe: Load balancing with LDP with RSVP LSPs in the middle
Rsvp is going to take the preference at your ingress router. Even though the igp cost remains the same on 1 for both the paths, the next hop will be selected on the route pref value (in this case it...
View ArticleRe: MX irb and SRX reth Issue
I am able to ping across this link from both sides by configuring a vlan on the SRX side. Perhaps this is indeed an issue with the single interface in a reth on the SRX.
View ArticleRe: ISIS Export Policies (Policy-Options)
Hi Rahul, Okay. We have progressed.I have set a static IPv6 address on the PPP Client Serial Interface, then I enabled IPv6 and also set a default IPv6 route (ipv6 route ::/0 serial 0/0).I also...
View ArticleClik here to view.
Re: support of Inline Active flow monitoring on MS-MIC with Junos 14.2 and...
Hi Vadivelan, Thanks for the clarifications. Finally, As you have replied that active flow monitoring can be configured on MS-MIC using Junos 14.2 with Version5 and Version8 but is it also supported on...
View ArticleMX80, dynamic address-assignment pools
Hi allI have MX80 BRAS,Junos: 13.3R6.5I try toassign IP address from NoMoney-POOL with RADIUS attribute ERX-Address-Pool-Name = "NoMoney-POOL", but in any case subscriber get IP address from IPoE-Pool,...
View ArticleRe: MX80, dynamic address-assignment pools
Hi, Please configure below knob and check once. DHCP# set system services dhcp-local-server pool-match-order external-authority Remove set system services dhcp-local-server pool-match-order...
View ArticleRe: support of Inline Active flow monitoring on MS-MIC with Junos 14.2 and...
Hi Badar, Sorry for the confusion here. here's the updated information MS-MIC/MS-MPC doesn't support flow v5 and v8. you can configure Junos Traffic Vision Version9 using Junos 14.2 with MS-MIC. HTH
View ArticleRe: MX80, dynamic address-assignment pools
Thanks for the update. Please help to close the thread by accepting the solution. Regards,Rahul N
View ArticleRe: ISIS Export Policies (Policy-Options)
Hi Clive, Please check your private message. I've updated there. Regards,Rahul
View ArticleRe: ISIS Export Policies (Policy-Options)
Hi Rahul, Thank you for the private message. It was very much appreciated. If I explain what our end result needs to be, then that may help showing what I am trying to achieve. The CPE will be issued...
View ArticleRe: ISIS Export Policies (Policy-Options)
Hi Clive, Your understanding is correct. You need to assign IPv6 address to PPP client. PPP NCP for IPV6 is different compared to IPv4.IPCP negotiate IP and IPv6CP negotiate interface-id. Address...
View ArticleClik here to view.
Re: ISIS Export Policies (Policy-Options)
Hi Rahul, I don't know why... I have no envelope sign so cannot access my PM... good job I have them forwarded to my e-mail Secondly, I have e-mailed my wireshark trace to you. Thanks Clive
View Article