Re: DCHP on VRF doesnt work properly
Hello, I have 2 routers that have the same issue, LOG-1 from the first router and LOG-2 from the second router.Please have a view Thank youErnest
View ArticleRe: DCHP on VRF doesnt work properly
Hi Ernest, Only DHCP logs were enabled.Client is failing due to license issue. Please find the below error log. Nov 27 20:39:16.719056 DH_SVC_AUTHENTICATE_LICENSE: Authentication failed due to license...
View ArticleRe: DCHP on VRF doesnt work properly
nestiern wrote:_______________________________________________________________-->show system licenseLicense usage: Licenses Licenses Licenses Expiry...
View ArticleGre tunnel max throughput MX Series
Hi everyone, Does anyone happen to know what the max throughput would be on gre tunnels for an MX series device? Thanks!
View ArticleRe: Gre tunnel max throughput MX Series
It is line rate. Only limitation is to number of tunnels, but you can use filter to de/encapsulate traffic...
View ArticleRouting through MPLS Network - VRF?
Hi, After a user has entered a network via L2TP and PPP, am I right in thinking that the best method of getting that user across an MPLS backbone ISP is via VRF's? If it is then could someone please...
View ArticleRe: Routing through MPLS Network - VRF?
Hi Clive, All you need is to create the loopback and address-assignment under the VRF. You can use radius-attribute “ERX-Virtual-Router-Name := "TEST" or you can use predefined variable. LNS# show...
View ArticleRe: Routing through MPLS Network - VRF?
Hi Rahul, Thank you.... much appreciated Thanks Clive
View ArticlePolicy Statement
Hello,I am new to using Junos!I am trying to learn how to use the policy to send routes into routing protocols.root> show configuration policy-options policy-statement Test { term 1 { from {...
View ArticleRe: Policy Statement
which route exactly u want to export? if u just want to export 2.2.2.2/32 then write following statement.. route-filter 2.2.2.2/32 exact; If you want to export route with 2.2.2.2/24 then you may use...
View ArticleRe: Policy Statement
Hello Milind,Thanks for the reply.Can you please tell me what does this match 'route-filter 2.2.2.2/32 address-mask 255.255.255.0'? I was under the impression that it would match the host 2.2.2.2 with...
View ArticleHow to Filtering the syslog flooding ?
HI all, Can someone guide me how to filter the log messages as per below that flooding the firewall. I'm try do config as per below but cannot work. Appreciate some advise. {primary:node1}FW02>...
View ArticleHow to match one of community and trigger action ?
Hi All I have a question for policy . If I hope to match one of community strings and trigger action , how do I do ?As follow is right way ? set policy-options community TW members "...
View ArticleRe: Policy Statement
Hi, Please read the below document which has a very good explanation about your query....
View ArticleRe: Policy Statement
Accepting Incoming IPv4 Routes by Applying an Address Mask to the Route Address and the Destination Match PrefixAccept incoming IPv4 routes with a destination prefix of 10.1.0/24 and the third byte an...
View ArticleRe: Policy Statement
Unlike firewall filters, the default action on policy-statement is accept . So when you dont specify a default term to reject/deny everything else other than your match condition, everything else will...
View ArticleRe: How to match one of community and trigger action ?
You policy looks ok to me.. However, i have not tried 3 communities using regular expressions in BGP community....
View ArticleIs possible to ECMP on vrf using only source-ip address hashing
Hi All Is possible to ECMP on vrf using only source-ip address hashing if I have route multipath to 2 device like a 0/0 next-hop PE10/0 next-hop PE2
View ArticleRe: Policy Statement
Hello Suraj,Will this config work?root@R2> show configuration policy-options policy-statement Test term 1 { from { route-filter 2.2.2.2/32 address-mask 255.255.255.0; } then accept; }term 2 { then...
View Article