Re: per-packet load-balancing hash on MX router
If you need traffic returned to the same interface which it leaves you can try configure Symmetrical Load Balancing
View Articlebootp helper secondary
Currently I have the following setup which works great across a EX2200, EX3200 or EX4200 running 12.3R6 to 12.3R11 depending on the site. set forwarding-options helpers bootp server 10.10.10.1 set...
View ArticleRe: bootp helper secondary
You can use smart relay to configure the secondary server. http://www.juniper.net/techpubs/en_US/junos13.2/topics/task/configuration/dhcp-and-bootp-relay-agents-qfx-series3.html
View ArticlePBF problem
Hi all,I am having some issues getting PBF working. Basically, I have two interfaces connected to Internet. One is used for ssl vpn access and it has a static IP that is nated and the other for...
View ArticleGRE routing issue
I have 2x Juniper EX-4550 in two different sites with internet connectivity and I want to route some public IPs (less than /24) from Site A to Site B. I configured a GRE tunnel but I fail to properly...
View ArticleBGP autodiscovery VPLS between Cisco ASR1k and Juniper MX
Hello Experts, I am runnig into a trouble configuring BGP autodiscovery VPLS between Cisco ASR1k and Juniper MX. We are mostly Juniper shop but planning to add Cisco boxes as PE devices. I am unable to...
View ArticleClik here to view.
Re: BGP autodiscovery VPLS between Cisco ASR1k and Juniper MX
hi ! if this what you have posted is all your cisco vpls config then it is clear that it does not work that way for further info look into cisco documentation or lokk on cisco live for the BRKMPL-2101...
View ArticleEX-4600 not advertising directly connected routes
Hello, I currently have an EX-4600 that has 3 active subnets configured out it with an export policy that advertises all directly connected routes. The routes are advertised to it's neighbors one of...
View ArticleRe: EX-4600 not advertising directly connected routes
Hi ! the Cisco OSPF has a higher lsa-lifetime ( as far as I remeber up to 18 hours) than JUNOS ( on JUNOS it is one hour ) OSPF advertises and updates prefix information using LSA messages, which are...
View ArticleRe: EX-4600 not advertising directly connected routes
Have you tried to check if it is an MTU mismatch issue ?
View ArticleInter VLAN routing / same subnets and uplink
Hello, I have a simple working VLAN isolation setup based on a VC of EX4300 for different endoints. Their default gateway is configured on the router which has multiple IPs in different subnets which...
View ArticleHow to edit permissions to allow show and deny editing under the same hierarchy
Hello, Someone know how to edit permissions of spesific class to allow show and deny editing under the same hierarchy for example:allow:show configuration routing-options static | display set deny:set...
View ArticleRe: BGP autodiscovery VPLS between Cisco ASR1k and Juniper MX
Hi, you need to configure the l2vpn-id within the VPLS routing instance on the Juniper router matching the one on the Cisco router. set routing-instances VPLS_Test l2vpn-id...
View ArticleRe: BGP autodiscovery VPLS between Cisco ASR1k and Juniper MX
Hi Alexander, Thanks for the link. I did not put here all my Cisco configuration which relates to VPLS thinking that i will need to correct something on Juniper box. Following Cisco Live presentation I...
View ArticleMX dropping traffic after GRE decapsulation
Hi All, I have the following setup : VM1 4.4.4.3/24——CONTRAIL——GRE——ge-0/0/0 MX-960 xe-1/0/0——2.2.2.2/24 VM2 I see that when a ping is started from VM1 towards VM2, the packets show up as input on...
View ArticleRe: MX dropping traffic after GRE decapsulation
Just an update : Got to know from ask-contrail that we need a trio-based line card for MPLSoGRE. We didn’t have one in our MX. I got one MPC and with that traffic started working (after reconfiguring...
View ArticleMX960 w/trio cards - QoS across AE?
We are testing out the abilities of the MX960 with some trio MPC's. We currently are running into an issue with QoS and customers that would terminate their L3 services at our MX960. To our knowledge,...
View ArticleRe: ECMP Static route with BFD Issue
Greetings this scenarios has come up again. Reading the RFC5880 it looks like the condition maybe caused because when we put our LB into a maintanence mode we set the BFD state to AdminDown and not...
View ArticleRe: Trouble with MX104 10G LR optics
What command do we have to put to enable the license though?Anyone knows?No option to apply a fresh one in the set system category it would appear:set system license ?> autoupdate Autoupdate license...
View ArticleRe: Trouble with MX104 10G LR optics
Hi CD, Please follow the steps provided in the below link to add a new license;http://www.juniper.net/documentation/en_US/junos15.1/topics/task/operational/junos-licenses-adding.html To add a license...
View Article