Clik here to view.
Re: MX960 w/trio cards - QoS across AE?
Yes, these two options are exactly the ones to choose from. When a scheduler-map is applied on a bundle, the scheduler-map is applied at each member interface and there is no synchronization between...
View ArticleS-MX104-UPG-2X10G how to apply
Hi, We purchased S-MX104-UPG-2X10G license to activate two ports in MX104 box. We received a document mentioning a S/N.Anyone knows the process to install the license to this box? Do we need an auth...
View ArticleRe: Trouble with MX104 10G LR optics
Hi SSN, How to request license code from Juniper? With the MX104 box we recieved only a document with S/N, that S/N is not a license code either. BRSmartm
View ArticleRe: Trouble with MX104 10G LR optics
As discussed, please contact the customer care to help you with the generation of the key.
View ArticleRe: S-MX104-UPG-2X10G how to apply
Yes, you need a proper license code - at least if you are running JUNOS 13.3 or later. Cheers,Carsten
View ArticleRe: MX960 w/trio cards - QoS across AE?
Thanks, we just couldn't get a straight answer and every time we talked to someone it was yes you can, or no you can't do that answers. It is the same story with other vendors after doing some more...
View ArticleRe: LDP-tunneling over RSVP in multi-area ospf network
hi ,do you got a solution for this issue ? i have a simliar issue and wanna a solution for this, i have added the knob "inter-domain" and "expand-loose-hop" , and the LSP, ldp tunnel session is up ,...
View ArticleRe: LDP-tunneling over RSVP in multi-area ospf network
xpguan wrote:hi ,do you got a solution for this issue ? i have a simliar issue and wanna a solution for this, Add an OSPFv2 virtual link between Your ABR and every nonzero area router where You have...
View ArticleRe: S-MX104-UPG-2X10G how to apply
You should get your license via email from your reseller. You can either contact the reseller directly or open an "Admin Service case" on the support site....
View ArticleRe: S-MX104-UPG-2X10G how to apply
Hi, It looks like you have the 14 digit software serial number. I guess you might have sorted this already but you can generate a license key using the License Management System at...
View ArticleOSPF LSA 1 and JNCIS-ENT
Hi,In past 15 minutes I took Exam Presentation test for JNCIS-ENT and I got a question: o_OWhat information is contained in an OSPF Router (TYPE 1) LSA? (Choose two)1. A description of the states of...
View ArticleRe: OSPF LSA 1 and JNCIS-ENT
Hello, ntwman28 wrote:Where contains information about ASBR in LSA 1??? It juniper mistake or my fail?Many thanks for you answer.Have You tried reading RFC2328?...
View ArticleMPLS loop
Hi,I'm studying for the JNCIS-SP and have set up a home lab. I'm currently stuck trying to configure a l3vpn and would appreciate any help. My core uses OSPF for its IGP. Full iBGP mesh. RSVP LSPs. My...
View ArticleMPC compatibility
Can someone point me to the documentation clearly stating whether the MPC5E and MPC3E-3D-NG are compatible in a MX240/480/960 chassis? Anyone have configuration stories to share on the status of...
View ArticleRe: MPC compatibility
http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/general/mpc-mx-series-supported.html Both MPCs are supported but you need to have SCBE or SCBE2 installed. For the...
View ArticleCHAS-MX80-S-A vs B
Hello, please what is the difference between CHAS-MX80-S-A and CHAS-MX80-S-B ? Thank you for your time
View ArticleInterfaces LED is RED
Hi Experts I'm installing a new router MX104, all is good expet one thing, the interfaces in FPC1 PIC0 are showing in RED Can you help with that please? SoufArch
View ArticleRe: Interfaces LED is RED
Hi,Try to issue the command "show chassis craft-interface"And please follow this...
View Article