Re: Can't see all bgp route
Hello there,Believe me or not but You are in fact receiving all 6 routes on R2: root@R2# run show bgp summary Groups: 1 Peers: 1 Down peers: 0 Table Tot Paths Act Paths Suppressed History Damp State...
View ArticleRe: Can't see all bgp route
Thanks for the quick reply! R2 is configured as level 1 and R2 facing interface of R4 configured as level 1 ISIS. R4's lo0 is in level 2. Does that can casue this issue ? root@R2# show protocols isis...
View ArticleRe: How to use script in Putty to send command line by line?
"Try adding crt.sleep <> .."Can you explain it in detail? Thanks
View ArticleRe: How to use script in Putty to send command line by line?
I was trying to say; please add sleep in the script used to push the config. Example, crt.sleep 3000000 <---- VBScript. sleep NUMBER[SUFFIX] <---- Bash Script Sleep Moreover this is a flow...
View ArticleGetting Error in neighbor 2.2.2.2 of group EBGP: VPN NLRIs cannot be...
[edit routing-instances OAM protocols] 'bgp' Error in neighbor 2.2.2.2 of group EBGP:VPN NLRIs cannot be configured or inherited in non-default instance: OAMerror: configuration check-out failed[1/11,...
View ArticleRe: Getting Error in neighbor 2.2.2.2 of group EBGP: VPN NLRIs cannot be...
Hi Folks,I doubt you have a group named EBGP in the same box. Can you please share the Candidate Configuration of the box. edit -> show | display set | no-more
View ArticleRe: Getting Error in neighbor 2.2.2.2 of group EBGP: VPN NLRIs cannot be...
Seams like OAM is not supported in routing instances. edit protocols oam should work
View ArticleRe: Can't see all bgp route
Hello,Remove this line from R2 config and You should be golden: root@R2# show protocols isis ignore-attached-bit;HTHThxAlex
View ArticleRe: How to use script in Putty to send command line by line?
You can also refer to this KB article on how to run VBScript using secure CRT: https://kb.juniper.net/KB16365 ThanksSarathi
View ArticleRe: Getting Error in neighbor 2.2.2.2 of group EBGP: VPN NLRIs cannot be...
It looks like another group called EBGP in the global instance has same neighbor 2.2.2.2 configured. We will have to look complete configuration to figure out why this configuration check is failed....
View ArticleRe: Can't see all bgp route
That's worked. Sorry, for this easy question. I just not much familar about ISIS thing. Thanks a lot for your help. Thanks,Jay
View ArticleRe: Getting Error in neighbor 2.2.2.2 of group EBGP: VPN NLRIs cannot be...
Hello, This combination is not supported: set routing-instances OAM protocols bgp group IBGP family inet-vpn unicastIf You describe what You are trying to achieve, we'd be able to suggest an...
View ArticleRe: Getting Error in neighbor 2.2.2.2 of group EBGP: VPN NLRIs cannot be...
Hi Folks,I did a quick teat and the observations is due to the family inet-vpn called under instance. Since On routers only, to enable MP-BGP to carry Layer 3 virtual private network (VPN) NLRI for the...
View ArticleBG_ set metric-type interna1
Hello Guys, what is the command/concept ( if ) equivalnt to set metric-type internal in Cisco
View ArticleRe: BG_ set metric-type interna1
Hello,Are You after this one?https://www.cisco.com/c/en/us/td/docs/ios/iproute_bgp/command/reference/irg_book/irg_bgp4.htmlset metric-type internalTo set the Multi Exit Discriminator (MED) value on...
View ArticleRe: pings failing and routing failing
Hi fran1942,we're having a similar issue on a EX3300 48P with the same error message in the logs. Did you find out anything useful? Thank you!
View ArticleRe: pings failing and routing failing
Hi Folks,Regarding your question, the facility "DAEMON-3" is of informational type and it has no impact on your EXBOX or network. The log " fpm_show_ex22x33_lcd_led_per_slot: port30 Duplex bit is set...
View ArticleClik here to view.
Re: pings failing and routing failing
Thank you! I found out after hours of strunggling that it seems to appear only when the web GUI is open, so it has nothing to do with all the rest.Back to the drawing board now
View ArticleRe: Why cannot implement commands in MX960?
try "commit full" when you have some downtime and then probably restart the router if thats is possible. But either options will need to be done in a schedule downtime.
View ArticleRe: Getting Error in neighbor 2.2.2.2 of group EBGP: VPN NLRIs cannot be...
Darn. I did not read that well. My bad.
View Article