Re: ospf area0 not connected
I am not sure I follow the topology correctly, but I think you might be breaking some basic OSPF area rules. There can only be one of each area and the area must be fully connected for all devices in...
View ArticleRe: MVPN - PE configurations
Hello Juniper Forum,As far as I can tell, I have all of the components set for MVPN on both PE's. I am wondering if there is a trigger to bring up teh MVPN neighbor (provider tunnel). This seems...
View ArticleRe: ospf area0 not connected
yes,spuluka. thanks very much for your reply.there are 2 seperated area 0 now. 1:I am wondering which issue I should see now(it was confgured wrong I guess).2: the way to fix it is to create a vlan and...
View ArticleRe: MVPN - PE configurations
Hi, Sorry for the delay in response. Can you please share the output of "show ldp p2mp tunnel extensive" from both PEs to check why the tunnel is not getting formed? From your configuration on PE1, I...
View ArticleRe: ospf area0 not connected
1:I am wondering which issue I should see now(it was confgured wrong I guess).Your OSPF route tables will not be complete and some devices won't be able to reach each other as a result. 2: the way to...
View ArticleRe: MVPN - PE configurations
Thanks for your help with this. "show ldp p2mp tunnel extensive" #This command did not work.SomeLabGuy@PE-1> show ldp ?Possible completions: database Show LDP label database...
View ArticleClik here to view.
redistribute same net into ospf in different devices
router1 has 1 link to switch1 and another switch2, only one link is active at the same time(it switch to other link sometimes). 1: should I add router1 into ospf area3 and advertise the...
View ArticleHow to Configure of OTN Interface
Hello , I have to configure OTN Interface with FPC MPC5E 3D 24XGE+6XLGE on MX960. Please help me , How to configure the OTN on mx 960? Thanks & Regards,
View ArticlevMX support for sFlow v9
Does vMX support sFlow v9? I cannot find it in patfinder. Thanks.
View ArticleRe: How to Configure of OTN Interface
Hi here all options for otn configurations. And here about optic options optics-options { wavelength 1563.05; los-warning-threshold -25; los-alarm-threshold -29; }
View ArticleRe: redistribute same net into ospf in different devices
Hello, I am assuming the blue router and the two green ones are all different. If only one of the links (r1-s1 and r1-s2) is active at any given time then it would be easier to configure the blue...
View ArticleRe: MVPN - PE configurations
Hello,Does anyone have a recommendation to move forward with this lab testing. Are there other Juniper forums where I can get some help with this lab? MVPN is not a very common topic.
View ArticleRe: MVPN - PE configurations
Problem solved:Removed these lines from the PE configs. auto-discovery found and brought up the MVPN neighbors. NOTE: Still testing....to verify multicast is still working between the CE's....
View ArticleSet dscp on ingress packets
Good day! I have a policy on Cisco ASR: interface Bundle-Ether1.100 service-policy input PM-SET-DSCP-DEFAULT service-policy output PM-SET-DSCP-DEFAULT .... policy-map PM-SET-DSCP-DEFAULT class...
View ArticleRe: Set dscp on ingress packets
Hi, An MF classifier configured as input firewall filter on the interface should be able to mark and classify selected packets on...
View ArticleCPU Utilization Values Issue
Hi,We have recently upgraded our MX480 router from JUNOS 13.3R6.5 built to the JUNOS 15.1F6.9 along with JSDN package support. After the upgrade we are seeing some different values in the show system...
View ArticleClik here to view.
dedicated links for specific prefix in ospf
As shown in the diagram above, there are area 0 ,2 and 5 in ospf. it is running well now since 3.3.3.0/24 and 4.4.4.0/24 has heavy traffic ,we plan to add 2 links to dedicated for these prefix (2 red...
View ArticleRe: CPU Utilization Values Issue
That is because your RE is re-1800x4 . This means that it is 4 core cpu. and utilization is shown 100% for each core. while you running on 13.3 juns use only single core of 4 available and show you...
View ArticleEnabling L3VPN multipath - BGP or routing-instance
Hi all, In the context of L3VPN (family inet-vpn unicast), what's the difference between: set protocols bgp group <group> multipathand:set routing-instances <vrf> routing-options...
View Article