Re: VPLS issue
I'm not seeing an obvious error in the configuration. In situations like these I like to start at one end and follow the flow. Is there packet ingress at the RADCan you see that arrive on the MX using...
View ArticlePlan and configure multiple routing-instances QFX-5100
I currently have a routing instance running on a QFX which manages several VLANs, some VLANs have their own filers assigned. I will be adding a new network, or networks, and I wanted to find the most...
View ArticleRe: Could I send ipv4 address over ospfv3?
I would like to see the lo0 of J5 is 5.5.5.5 route but I don't see it as the output below: root:J2> show route 5.5.5.5root:J2> show ospf3 database OSPF3 database, Area 0.0.0.0 Type ID...
View ArticleRe: Could I send ipv4 address over ospfv3?
What you are configuring is out of my realm. I can suggest a few commands, but I have no idea how to troubleshoot your issue.show ospf3 routeshow ospf3 database extensiveshow ospf3 interface detail
View ArticleRe: MVPN - PE configurations
Hello, There is a very useful book "This Week: Deploying BGP Multicast VPNs, 2nd...
View ArticleRe: MX with DPC and chained composite nexthop
Hello,The answer can be found in the documentation:http://www.juniper.net/documentation/en_US/junos/topics/example/example-configuring-chained-composite-next-hop.html********** On MX Series 3D...
View ArticleStatic route issue with j2320 upgraded v9.5
Hi, We have upgaded to 9.5 from 8.1, since performing this we cannot get connections from our citrix clients remotely through an MPLS to connect to our hosts. Previously it was just required to add...
View ArticleRe: Static route issue with j2320 upgraded v9.5
If I understand you correctly here, this is not really being used as a firewall. If that is the case your best bet would be to just enable packet mode and turn off the stateful firewall. set security...
View ArticleRe: Static route issue with j2320 upgraded v9.5
Hi,Ok had a look at that article, the status statement comes back syntax error (tabulating on that does not show status as an option)? At the moment also i am not using any of the MPLS options in the...
View ArticleRe: Static route issue with j2320 upgraded v9.5
Perhaps the command is slightly different in this old version of Junos. See at which point in the hierarchy the commands won't tab out. Do not confuse this with configuring MPLS this is just the...
View ArticleRe: Could I send ipv4 address over ospfv3?
root:J2> show ospf3 routePrefix Path Route NH Metric Type Type Type5.5.5.5...
View ArticleRe: Could I send ipv4 address over ospfv3?
Can you show the complete configuration? At least we know that ospf is not running on the lo0 interface so thats why you are not seeing the route being advertised. BTW did you also enable family inet6...
View ArticleRe: Could I send ipv4 address over ospfv3?
Hi, what you are looking for is "multiple address families in OSPFv3" which looks like it's only supported on high-end platforms...
View ArticleClik here to view.
QFX as P-LSR ?
HiWe are looking at deploying the QFX5110 and/or QFX5200 as MPLS LSR - pure P - routers. Do any of you have pratical experience from production enviroments running such platforms in roles that are...
View ArticleRe: Could I send ipv4 address over ospfv3?
It works with command:root:J5# set interfaces lo0 unit 5 family inet6 root:J2> show route 5.5.5.5inet.0: 11 destinations, 11 routes (11 active, 0 holddown, 0 hidden)+ = Active Route, - = Last...
View ArticleFBF on QFX5100
Hey All, I have FBF configured on a QFX5100 VC setup. I use this to route specific traffic to a web filter appliance. I'm working with the rules and it looks like regardless of how my firewall rules...
View ArticleRe: FBF on QFX5100
Looking at the config on my iPad mini so may also be missing something obvious but the general structure looks OK. Looks like you have counters on the firewall filters...are they incrementing?
View ArticleClik here to view.
Re: CGNAT on MS-MPC Best practice
Hello,I suggest You consider Deterministic NAT where Your privateublic IP ratio will be exactly 2:1, and "free port block hunting" inherent to PBA is...
View ArticleSwitch VC Reboot on Commit
Hi, We have a problem on our EX4200 VC, when we make any change on our switch (12.3R6.6) VC one of the members reboots. The changes we have done is only a user profile (ro to super-user) and add a ftp...
View Article