Re: Policer limit rate input ? Right or wrong
Hi, I think it is before the filter is getting applied. Can you please check if you see drops in "show firewall filter LIMIT_BW" output? If the policer limit is hit, you will see the drops in the above...
View ArticleRe: Subscriber management VLAN ranges limit
Hi Mayar, We are still seeing the same issues after reducing the vlan-ranges limit. And I don't see anything when I issue the command you specify there. Any other interface on the same router rather...
View ArticleRe: What is the maximum of router in a VRRP group?
Typically I've seen VRRP done with only two devices but have occasionally seen quad redundant paths where four routers participate in the same group. So I know at least that many will work.
View ArticleRe: MX80 - stitch two interfaces with same VLAN-ID id in a VR.
'bridge-domains' configuration can only be used for 'instance-type virtual-switch'One more thing to add to what akushner said, You can also use instance-type virtual-switch and configure bridge-domain...
View ArticleBGP peering via (allow) not working
Hello All, Kindly I am configuring BGP to peer automatically with members of a subnet using:set protocols bgp group Route-injectors allow 10.10.10.0/24 And I have a server whose IP: 10.10.10.5/32 -...
View ArticleRe: BGP peering via (allow) not working
Did you try enabling BGP traceoptions and checked if there's anything in the trace logs? Also, can you paste both of the configuration here?
View ArticleRe: BGP peering via (allow) not working
One more thing, Allow command is a passive command. As soon as you configure allow option, BGP will listen for any tcp connection sourced from any of the address in allowed subnet.BGP will not actively...
View ArticleRe: MX80 - stitch two interfaces with same VLAN-ID id in a VR.
We removed xe-0/0/2.123 and ae0.123 from the routing-instance config but still had issues committing - same error. Unfortunately this instance has to be type virtual-router, so we wound up moving the...
View ArticleRe: OSPF external routes - changing the preference with import policy
Hi, The other option is to lower down the BGP preference for this particular prefix. set policy-options policy-statement xyz from protocol bgpset policy-options policy-statement xyz from route-filter...
View ArticleBGP Load balance export prefixes
Hi everyone! I have the following topology: R1 _____ ISP1-R1 |_______ ISP1-R2 I export prefixes to this bgp group of 2 neighbours with the same AS with multipath and load balanced per packet. The...
View ArticleRe: BGP Load balance export prefixes
You can almost do anything with the policies in BGP. There are several attributes in BGP which you can manipulate to acheive this task along with exporting half of prefixes to one neighbor and the othe...
View ArticleRe: BGP Load balance export prefixes
singhh Which attributes of BGP can I configure to do that? There's no other router behind R1 and R2. I can reach R1 and R2 directly. Thanks!
View ArticleRe: BGP Load balance export prefixes
Can you share your rough topology? It's not quite clear where do you want to load balance. For Attributes:a) You can advertised all the routes to both neighbor and then apply a policy in which you...
View ArticleRe: BGP Load balance export prefixes
Hi, I made some changes to attributes and finally get results.Thanks to your reply I start reading about MED and find the way to accomplish the goal. These are the more significant configurations to...
View ArticleRe: BGP Load balance export prefixes
So, you are able to load balance now.. is it correct?
View ArticleRe: BGP peering via (allow) not working
Hello Singhh, Kindly I am peering with linux servers, but from my side you can see the following configs: mkh@LAB> show configuration protocols bgp group v4-route_injector_Directtype...
View ArticleRe: can i map 7 channelized stm1s to STM16 port on MX960?
I have only ever bundled two but according to the documentation Junos can bundle up to 64 with 13.3 or later. Naturally you need to have the same bundling setup on the service provider side so you...
View ArticleRe: BGP peering via (allow) not working
Can you monitor traffic on the interface which is connected to your server and see if you see any incoming TCP connection request from the server?Kindly monitor the interface with both configuration...
View ArticleOSPF routing issues
Hi, Need your help with the attached scenario I am currently testing in a lab. LSA-1 X.X.X.X/24 is advertised by CE-3 to PE-3 which is redistributed from OSPF to BGP on the PE-3. PE-3 advertise the...
View ArticleRe: can i map 7 channelized stm1s to STM16 port on MX960?
Hi Steve, I might have phrased the question wrongly. what am looking for is not bundling 7 seperate STM1s on different ports but crossconnecting 7 STM1s on STM16 port. my router has STM16 port and this...
View Article