Re: Looking for Policer's root oid for physical ports.
Hi, Try using below link to explore the OID's. https://apps.juniper.net/mib-explorer/ Regards,Rahul
View ArticleRe: Looking for Policer's root oid for physical ports.
https://forums.juniper.net/t5/Management/MX-policer-monitoring/td-p/160062 Regards,Rahul
View ArticleRe: gre tunnel on bridge
Yes it works above 15.1 BUT there are a bunch of missing/buggy features1. GRE key does not work at all2. GRE keepalive or BFD not implemented3. problems with fregmentation of packets4. OAM on interface...
View ArticleRe: gre tunnel on bridge
True, though the MS-DPC is considered EoL since late 2015 hence it lacks the S/w enhancement introduced in JUNOS 15.1 onwards.https://www.juniper.net/support/eol/mserie_hw.html
View ArticleRe: Filter Based Forwading / Policy Based Routing on Locally Originated Traffic
Hello, Yeah, I knew about the next-interface/next-ip commands, and yes, like you said they are not available on 12.1. FYI, this can be done easily on Cisco using local...
View ArticleRe: Filter Based Forwading / Policy Based Routing on Locally Originated Traffic
Hello,It does not work, is not supported and never worked - speaking from experience here.You would need to loop Your the locally-originated traffic via a PFE interface (it could ge|xe|et|ae or even LT...
View ArticleChosse Destination according to AS Path
Hello dears,I have 3 router A,B and C. Router A is the head router on wich my upstreamer is connected BGP peering.Router B is a Route Reflector and is connected to router A, BGP peering.Routeur C is...
View ArticleRe: Updating Prefix list automatically from BGP received routes
Spuluka, Thank you for the response, i am not sure if i understood you correctly. you mentioned updating the "policy statement" while my concern was to update prefix-list automatically. i have a...
View ArticleRe: Updating Prefix list automatically from BGP received routes
Sorry for the misunderstanding, I was thinking you were using the prefix list as part of your BGP import policy with this peer not for traffic from these ip ranges. Looking at your filter, it appears...
View ArticleRe: Chosse Destination according to AS Path
I assume that customer P1 is ultimately responsible for the /17 that is advertised somewhere else on their network to another upstream peer and thus you are learning it coming in from your final...
View ArticleRe: IPv6 RE filter not working
Hi Guys, I could find this public KB article which clearly states that loopback filter is not supported on ACX platform and the workaround is to either use a forwarding table filter or applying the...
View ArticleRe: IPv6 RE filter not working
It was not supported earlier. We need to modify the KB it seems.
View ArticleAdvertise BGP IPv6 Prefix
Hi, Quick couple of questions please: Overview: Advertising networks to upstream BGP ISP. Configuration of policy-statement so far:set policy-options policy-statement ninegroup-network term 1 from...
View ArticleRe: Advertise BGP IPv6 Prefix
set policy-options policy-statement test term 1 from family inet6 route-filter 2001::1:2:3:4/128 exactset policy-options policy-statement test term 1 then acceptset protocols bgp group test export test
View ArticleRe: Advertise BGP IPv6 Prefix
1: Will this be advertised to the upstream peer correctly please? (I cannot test until the system is in situ)Yes2: I also need to advertise our IPv6 prefix but cannot place it in that policy statement....
View ArticleRe: Advertise BGP IPv6 Prefix
Hi Kingsman, Perfect. I have configured that and added to the eBGP group to advertise to upstream peers. Very much appreciated.
View ArticleDynamic profile versioning
Hi, I wish to enable the following : set system dynamic-profile-options versioningAnd get the following response:error: Cannot modify dynamic-profile-option versioning, dynamic profile is...
View ArticleRe: Dynamic profile versioning
Hi Clive, Please deactivate the current dynamic-profile and then "set system dynamic-profile-options versioning"if you the subscriber using the dynamic profile, the system again will not allow to...
View ArticleRe: Dynamic profile versioning
Also, you dont require to delete any dynamic-profile, just deactivate existing dynamic-profile (ensure the NO subscriber is using/attached to dynamic-profile(s) ) and then commit. Now "set system...
View Article