Re: Dynamic profile versioning
For Example:lab@re0# commitre0:error: Cannot modify dynamic-profile-option versioning, dynamic profile is configured.error: foreign file propagation (ffp) failedlab@re0# deactivate...
View ArticleRe: Dynamic profile versioning
Hi Karand, Deactivated dynamic profile and linked L2TP profile, enabled versioning and re-activated dynamic and l2tp profiles and everything works perfectly. Thanks you
View ArticleRe: Dynamic profile versioning
Glad to hear that Clive! Now with versioning enabled on your MX, operator can make changes to dynamic-profile without deactivating nor logging out of subscriber. Cheers..
View ArticleAdvice on switch cutover
Hi all, first off, thank you for your warm welcome to the community. I love Juniper!I was hoping for your advice and experiences with cutting over core nodes to a new location. We are moving a large...
View ArticleRe: Advice on switch cutover
I've used this method for a number of physical location moves over the years. If you can match the hardware and ports it is especially convenient. And it makes the rollback pretty easy as well. You...
View ArticleRoute advertized through BGP, not seen in received routes on the neighbouring...
Hello everyone. Gotta an issue I've been struggling with. I have this iBGP peering taking place between a QFX5100 and a MX104. Goal is to grab IX routes from one of my POPs, get them into VRF, export...
View ArticleRe: Route advertized through BGP, not seen in received routes on the...
Hi, Few things wanted to clarify:1. The route 1.0.4.0/24 on QFX - what is the origin of this route. How is QFX learning this route?2. If you do a "show route receive-protocol bgp 50.21.165.3" do you...
View ArticleRe: Route advertized through BGP, not seen in received routes on the...
1- Route is learned this way:IX -- eBGP -- QFX -- VRF MP-BGP target:XXXX:XXX export -- import -- QFX -- iBGP -- MX (VR) 2- The output of that command is in my first post, route is not seen in...
View ArticleRe: Route advertized through BGP, not seen in received routes on the...
Yeah it was the loop thing, weird MX didn't let me know. **bleep** you MX. BGP-BLENDED.inet.0: 681732 destinations, 3410466 routes (681723 active, 0 holddown, 139 hidden) 1.0.4.0/24 (7 entries, 1...
View ArticleRe: Route advertized through BGP, not seen in received routes on the...
Hi,Good to know you figured out that it is because of loops. Ideally if you turn on BGP traceoptions, we should see MX reporting some reason for not accepting that route. Thanks
View ArticleRe: Route advertized through BGP, not seen in received routes on the...
Hello, wrote:Yeah it was the loop thing, weird MX didn't let me know. I wonder what do You expect MX to do for You in this case (send email/flash lights/beep/spin fans at full speed/anything else?)...
View ArticleRe: Route advertized through BGP, not seen in received routes on the...
You know, your post would have been nice without the sarcasm. One would think that I've checked the documentation since I had actually found the solution. QFX was hiding the route with something like...
View ArticleBFD Best Practices
Hello, With an ISP environment using ISIS/MPLS, what is the best practices to deploy BFD ?- @ IGP Level only ?- @ MPLS level only ?- @ Both ? What's recommended values for minimum interval and...
View ArticleLSP Configuration @ Core Routers Level
Hello, Is it feasible to configure LSPs @ Core Routers levels (P Routers) ?In which case we have to deploy this solution ?What's the benifits ? Thank you. Best Regards.
View ArticleRe: RSVP/LDP Labeling
So, at transit router, an operation swap for label 200 by label 200 can happen ?
View ArticleRe: RSVP/LDP Labeling
Yes, It can. routers will have a different meaning of label 200 (both advertised and received) HTH
View ArticleRe: LSP Configuration @ Core Routers Level
LDP over RSVP tunnel does this work . You can run RSVP LSP's between P routers and LDP will be run between PE and P routers and tunneled over RSVP . Please refer below link for detailed explanation:...
View ArticleRe: BFD Best Practices
@ IGP level you can scale upto 500 BFD session per router at 50ms min interval and multiplier 3 @ Mpls level you can scale (Interval * Multiplier ) number of session if min interval is 1 sec (1000...
View ArticleRe: LSP Configuration @ Core Routers Level
Hello,Apart from LDP-over-RSVP tunneling, there is a few more use cases where P routers can be headends/tailends for RSVP LSP:1/ hierarchical RSVP LSP a.k.a. OSPF forwarding...
View ArticleRe: BFD Best Practices
For fast failure detection, you may configure BFD for both IGP as well MPLS. For IGP - you may keep the values beyond 100 ms. I have configured 300 ms as hello time and multipler by 3.Follow the kB...
View Article