Re: VPLS failing with routing-engine failover
Hi, As Steve and Karan, suggested you may configure NSR and GRES. Along with it, you may also configure GR (Graceful-restart) of the protocols. One more suggestion - instead of "request chassis...
View ArticleRe: VPLS failing with routing-engine failover
Hi everyone. Thank you all for your replies and suggestions. Both options are configured as follow: chassis { redundancy { failover { on-loss-of-keepalives; on-disk-failure; } graceful-switchover; }...
View ArticleRe: VPLS failing with routing-engine failover
okay..However, still you may check the following which i did see in your config.....
View ArticleRe: VPLS failing with routing-engine failover
In that case, review the effects of a Routing Engine Switchover:https://www.juniper.net/documentation/en_US/junos/topics/concept/gres-overview.html#section-ha-overview-feature-comparison
View ArticleRe: VPLS failing with routing-engine failover
Yes, both router have exactly the same configuration. If I understand correctly what you are saying, I do need to enable the statement "graceful-restart" either globally, or per protocols I am using?
View ArticleRe: VPLS failing with routing-engine failover
Thank you Karan. I am not sure which table apply to me and if I am using the right solution with "graceful-switchover". Do I need another option rather? Thank you for your insights, much appreciated.
View ArticleRe: VPLS failing with routing-engine failover
Since your VPLS signalling is via BGP, would suggest to configure NSR precision-timers-max-period as another...
View ArticleRe: VPLS failing with routing-engine failover
Karan, thanks much for sharing your expertise with me. I'm running RE-S-1800x4, MPC-3D-16XGE-SFPP and DPCE-R-40GE-SFP in my kit. I doubt the DPCE-R-40GE-SFP can work with 16.1. If possible, I would...
View ArticleRe: VPLS failing with routing-engine failover
you can enable the gr gloabally under routing-options hierarchy.. also, As Karan mentioned, >show task replication >> check if protocol sync is completed>request chassis routing-engine...
View ArticleRe: VPLS failing with routing-engine failover
Thank you. I can't turn that option on, unfortunately -- I get this: username@router# commit re0: [edit routing-options] 'graceful-restart' Graceful restart and Nonstop routing may not be enabled...
View ArticleRIP Metric Change for specific neighbour
HI, i am testing in Lab . i have two neighour in protocol rip group and same routers are learn from both neighbour. I am trying to change metric for neighour for specific routes (1.1.1.1/32) but its...
View ArticleRe: RIP Metric Change for specific neighbour
For specfic neighbour, simply use metric knob as follows:https://www.juniper.net/documentation/en_US/junos/topics/topic-map/rip-metrics.html
View ArticleRe: RIP Metric Change for specific neighbour
and use specfic route, use route-filter for route to match: set policy-options policy-statement met from route-filter x.x.x.x/x exact set policy-options policy-statement met then metric 5set...
View ArticleRe: Adding virtual route when VRRP Master
hi,I'm trying to do the same,when I add my configure matching IRB interface, I get commit failed on "within clause must be configured" not sure what this means.can somebody help with that? here how it...
View ArticleRe: Adding virtual route when VRRP Master
from my point of view, better option will be configure bgp sessions from each vrrp neighbour and manage traffic flow via local pref.
View ArticleRe: Adding virtual route when VRRP Master
i totally agree,but for now , i was able to fix it by matching interface address. regards
View ArticleRe: RIP Metric Change for specific neighbour
Thanks !. So i need to change each neighbour in different group and change metric ? Can i do without changing group ? Just matching neighbour and change. which is not working for me? i have two...
View ArticleJ6350 over-utilization of memory
Hello, and thanks for your time and attention. I am trying to determine the best method of significantly reducing the memory usage on one of our J6350 routers (Rtr-1) without causing too many new...
View ArticleRe: [MX 480] No console access on devices Master RE
Hi spuluka, Console is not disabled and it's not even defined under system . My question though is if I restart the MGD process then will this affect in any way the forwarding plane ? Since my issue...
View Article