Clik here to view.
Re: Multicast routing in virtual-router instance
Hello, wrote:i`ve checked TTL. Looks like its ok. Do You have an IGMP join from the receiver? show igmp group detail- will reveal it. wrote: I`ve tried to ping multicast from my juniper box, but had...
View ArticleRe: Multicast routing in virtual-router instance
I got it on client`s side:Interface: ge-0/1/0.0, Groups: 2 Group: 233.33.183.54 Group mode: Exclude Source: 0.0.0.0 Source timeout: 0 Last reported by: 192.168.10.2 Group timeout: 252 Type: Dynamic...
View ArticleRe: EX4550 port configuration for VMWare ESXi to support many VLANs
If you enable Jumbo frame at the Juniper, You need to make configuration changes on all environment(Guest Network driver - OS, VMware Virtual Switch, Physical NICs on hosts and all intermediate...
View ArticleRe: EX4550 port configuration for VMWare ESXi to support many VLANs
No, you dont have to change mtu on all esxi hosts. The main goal is that your actual MTU should be lower or equal MTU on the path. If frame is biger than path MTU than it will be dropped. If its lower...
View ArticleRe: RSVP PATH SIGNALING but data pass only in one side
Colleagues, can anyone come in handy - on the Extreme X670G2 switches broke PHP ....
View ArticleRe: EX4550 port configuration for VMWare ESXi to support many VLANs
This is not a must, it is necessary for better performance. https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/techpaper/performance/Perf_Best_Practices_vSphere65.pdf
View ArticleCannot PING between PE to PE (MX2020)
Hi, I have been seeing a very strange issue is that we have 2 MX2020 devices. One of the devices having a family inet interface and routing-instance can ping between PEs easily without any issue....
View ArticleRe: Cannot PING between PE to PE (MX2020)
Hi, Any chances you might be inheriting some group settings on the first PE. show configuration routing-instances RI-XXXX | display inheritanceAFAIK, the instance-type needs to be specified for...
View ArticleRe: Cannot PING between PE to PE (MX2020)
wrote:Hi, Any chances you might be inheriting some group settings on the first PE. show configuration routing-instances RI-XXXX | display inheritanceAFAIK, the instance-type needs to be specified...
View ArticleDHCP-Relay not forwarding remote DHCP DISCOVER packets over EVPN/Virtual Switch
Both routers running 18.3R1.9 Topology:Remote Laptop (DHCP Client)-->(Access Port) MX40 (PE-2)<--->EVPN/Virtual Switch<--->MX104 (PE-1 w/ IRB as DHCP Relay)-->DC w/ DHCP Server We are...
View ArticleRe: Cannot PING between PE to PE (MX2020)
Hi, Can see some settings being inherited, however cannot see the instance-type defined.You can check using:show route instance RI-XXXXshow configuration groups 'GR-L3VPN'To go back to the original...
View ArticleRe: Multicast routing in virtual-router instance
The problem was not on MX side. Above configuration is correct and should work. The problem was with inet address on uplink side.
View ArticleOSPF Default Route
Hi all,I have an issue (lack of skill) that I am hoping someone can help me out with. The situation is that we have a firewall connected to the internet, the firewall is connected to a QFX5100 running...
View ArticleRe: OSPF Default Route
Hi,Since you already have a default route towards firewall in QFX, there is no need to add second default route with discard next hop and no-install option. Remove second default route with discard...
View ArticleRe: OSPF Default Route
Hi Nellikka,I will give this a go over the weekend and let you know how it goes.Theres a little more work than just this route as we are changing ISP's / external public ip's etc. Cheers
View Articlevirtual-router by default contains ipv6 table
hi I have some routing-instances defined with only ipv4 content.yet when I look at the routing tables I also see an ipv6 table for the routing-instance. Can I disable this? Many thanks
View ArticleRe: Cannot PING between PE to PE (MX2020)
Hi, Thank You for your reply. I tried checking the "show configuration groups GR-L3VPN" but shows nothing inside. Anyways, I applied the two missing groups to the routing-instance and I can indeed...
View Articleresolution
Hi All, Looking for some expertise on route resolution: I understand that route next-hop resolution can be configured to consult more than one route table with the 'set routing-options resolution rib...
View ArticleVerify hardware status of MX480
Hi I installed all component of MX480 but there's some issues on hardware as below 1. RE LED doesn't show but when I console and use command "show chassis routing-engine" all status is good. Is it...
View Article