Re: What does the cty command do?
Hi, It gives you the console access of FPC. >start shell cty fpc0
View ArticleRe: What does the cty command do?
Hello, Consider vty like a telnet/ssh connection to the FPC &vty as the console connection to the FPC. Certain commands can not be run through vty, so cty to the FPC connection is needed. Regards,...
View ArticleRe: Can I create re-write rules for some forwarding-class ?
use import in rewrite-rule show configuration class-of-service rewrite-rules dscp core-dscp { import default; forwarding-class network-control { loss-priority high code-point cs7; loss-priority low...
View Articleflowspec
Hi Guys anyone implemented flowspec in their environment ?https://www.nanog.org/sites/default/files/tuesday_general_ddos_ryburn_63.16.pdf
View ArticleRe: MPCPFE error - range_bsearch_done and incoming traffic dpops
You can get the answer from https://kb.juniper.net/InfoCenter/index?page=content&id=KB30724&actp=search"Syslog message: LUCHIP(1) RMC 0 Uncorrectable ECC"
View ArticleHow do I exit from a cty?
Once I've cty'ed into an FPC, how do I go back to the router shell? I tried 'exit' and 'quit' but they don't work.
View ArticleRe: How do I exit from a cty?
Try Ctrl+C.=====If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
View ArticleRe: Route Annomaly
Hi,Currently the traffic outbond back to ae1 again. here for output command.nec-riad@R5.MD.PE-TSEL.1> show mpls lsp ingress bypass brief Ingress LSP: 1 sessionsTo From State Rt Style Labelin...
View ArticleRe: Route Annomaly
Hi, Is the primary LSP down and ae0 interface down?I believe you would need to find the cause why the primary LSP is going down and fix.Can you check the RSVP neighbors:show rsvp neighborCheers,Ashvin
View ArticleL3VPN double route export
Hi all, Thanks for taking the time to read my question. I am building an MPLS-EVPN environment with 4 devices (2x MX 2x EX) and they will be connected full mesh logically. However, there is a layer1...
View ArticleRe: L3VPN double route export
Hi, I believe there would be 2 standard methods:1. Full mesh iBGP2. Resilient Route Reflectors You would need an IGP running to provide reachabiity of loopback addresses on which BGP would be...
View ArticleClik here to view.
Re: L3VPN double route export
Full mesh iBGP ofcourse... Why didnt i think of that Thanks! Works great.
View ArticleTwo shaping rates on traffic leaving the same logical interface
Hi, I'm looking for a way to achieve a clean CoS configuration for the following scenario. The device in question is an MX-series router (MX104 or MX80). I have two differents types of traffic,...
View ArticleNull route + BGP community tagging
Hello Community, I hope you are all well. I am having some troubles setting up some sort of config in one of my routers. Maybe someone here can assist me or guide me. I am trying to set in my lab a...
View ArticleRe: Null route + BGP community tagging
Hi , show us what is wrong. attach your lab setup , show route info and configration
View ArticleOSPF ASBR Summary LSA Type 4
Hi Everyone,Prepping for my JNCIS-ENT right now. Working through OSPF. Have a question about LSA Type 4. If you have a backbone Router connected to another AS(RIP,BGP,static routes etc..). Does it...
View ArticleRe: OSPF ASBR Summary LSA Type 4
So it appears to be normal. This article really explains it well. http://thenetworksherpa.com/ospf-what-really-triggers-type-4-lsa-origination/
View ArticleRe: Can I create re-write rules for some forwarding-class ?
Hi allI use MX Import default will rewrite follow default rules but if i need rewrite only fc "be" but other fc preserve last dscp bit
View ArticleQinQ encapsulation on l2vpn
Hi, I have a QinQ S-TAG vlan 11 carrying C-TAG: 100-110 and S-TAG 12 carring C-TAG: 200-210 and so on.All on one MX interface:set interfaces xe-1/0/0 unit 11 description "QinQ Location 1" set...
View Article