Re: MSS on MX80
unfortunately this is not a solution that should be applied to normal firewall filter
View ArticleRe: how to configure DHCP server on MX 960
Hi Aarseniv / All, I'm try using config as per below but not work. The diffrenet is the physical interface was diffrent ip address with pool segment and im using logical interace such as ae0.59. The...
View ArticleRe: Totally NSSA area and LDP
Hi, aarseniev Thanks for the reply I'm aware of that but I have to solve this for the 12.3 version of JUNOS. Update is not an option.
View ArticleRe: J-Flow configuration not working
This still isn't working for us. One thing I have left out, is that we have migrated into using a routing-instance, would this affect the j-flowWould we need to configure up an interface outside the...
View ArticleRe: Rate limit in ae interface
You should be able to polie the trafic, Have you tried that yet?
View ArticleRe: Adding Bridge Domain VLAN to VPLS
Hi, I believe having a tagged sub-interface would be best, as the other option would move the interface and all vlans under the virtual-switch.Example of sub-interface method config:instance-type...
View ArticleVerify Interface Damping
Hi guys, I have concern with interface flapped because transport. Then I implemented interface damping on physical interface.This is my configuration:nec-riad@R5.MD.PE-TSEL.2> show configuration...
View ArticleClik here to view.
Spanning tree config on irb with VRRP on mx 240
I have the above the architecture in which I have 2 MX 240 running in mclag active - active, all four links are in collecting and distributing state and mode active - active. We have 2 interfaces in...
View ArticleRe: Spanning tree config on irb with VRRP on mx 240
Hi, rstp edge is configured on ports on which no BPDU is expected, such as servers/hosts. In your case, ports to the core switches are not edge ports. The current root bridge may be having lower...
View ArticleRe: Totally NSSA area and LDP
Hello,Well, if You are using pre-16.1 LDP then You have to allow /32s one way or another in the OSPF area. Period.You can try LDP DOD with /32 static routes but this is not scalable.kr3ator wrote:I...
View ArticleRe: Rate limit in ae interface
The result will have that rate limit total of ae1.1 + ae1.2 is 200mb or 400mb? With this config, you get 200mb on each logical links. And this input filter controls the inbound traffic from AS80. you...
View ArticleRe: Back Up Routing Engine is initiating ftp sessions to save the...
Please find the below information :- nabeel.nasir@ MX-AGGRE-R1-re0> show system configuration archival /var/transfer/config/:total blocks: 8total files: 0
View ArticleBroadcast Multicast log messages on MX240
MX24012.3R4.6 Does any one knows what does those log messages mean and how to troubleshoot it ? Oct 18 12:33:16 PTK-NB-ACC-RTR-205 rpd[1604]: EVENT <Flags> ge-1/0/5.21 index 924 <Broadcast...
View ArticleRe: Broadcast Multicast log messages on MX240
This is debug messages , you do not need to troubleshoot them , just ignore, or change log level in system syslog
View ArticleRe: Broadcast Multicast log messages on MX240
Thanks for the fast reply !How can I know this MAC belog to which device ? Oct 18 12:33:16 PTK-NB-ACC-RTR-205 rpd[1604]: EVENT <Add> ge-1/0/5.39 index 1103 <Broadcast Multicast> address #0...
View ArticleWhat does the cty command do?
Hi.I know that the vty command is used to log into an FPC/MPC. But what does the cty command do? How do I execute it? I tried 'cty fpc0 pic0' on my MX router and didn't do anything. Thanks.
View ArticleCan I create re-write rules for some forwarding-class ?
Hi I want to config re-write rules for some forwarding-class eg. BE but other forwarding-class use old tag
View ArticleRe: Can I create re-write rules for some forwarding-class ?
Hello, Which device you want to implement this rewrite-rule on? What is the exact model?Also how many forwarding classes you have & out which how many you want to have rewrite rules applied to?...
View Article