Re: How to apply local-preference to all routes without a hard reset of EBGP?
Please confirm that the "new" egress router is advertising the route with the correct next-hop and correct attributes.show route advertising-protocol bgp X Confirm that the local router effectively...
View ArticleL3 VPN Hub and Spoke
Hi experts, I need to set up a L3VPN hub and spoke for a customer. I have previously done this using different RT's for hub and spokes. This time however there will be multiple spoke sites connected to...
View ArticleRe: Monitoring Radio between OSPF sites.
This was not configured by me but those ports are now in /29 subnets. I have the link between Hera and Eos as follows: Network10.1.2.2429Hera 0/1Port10.1.2.2529Radio to EosRadio10.1.2.2629Radio to...
View ArticleRe: Advertising routes between two SRX210 directly connected devices
Thanks bro , now it is working. but let me to tell you one thing more about my jncia dumps.how to get dumps of jncia so that i may be able to take my paper .any idea
View ArticleRe: EVPN: No /32 route for existing MAC adress
Do you see MAC entries for .82 and .89 under evpn arp-table?
View ArticleRe: Advertising routes between two SRX210 directly connected devices
Three things, first read Junipers security and integrity of the exam ceritfications.second, your test if you pass will passed through a special algorithym to check if you have seen the questions before...
View ArticleRe: routing-options { static { route 0.0.0.0/0 next-hop 111.11.11.1; route...
enable ospf traceoptions on both devices. Do you see the static routes in LSD on the SRX? Are there any hidden routes on either systems? Are there any filters on the 4200 that could be reecting the...
View ArticleRe: How to apply local-preference to all routes without a hard reset of EBGP?
Routing polices do not affect routes that are already in the routing table. hey affect routes as the are leaving of entering the routing table. I don't have the time to set up a test now but you could...
View ArticleRe: EVPN: No /32 route for existing MAC adress
show evpn commands are mostly blank. username@CORE01> show evpn arp-tableusername@CORE01> show evpn mac-tableusername@CORE01> show evpn statistics username@CORE01> show evpn nd-table...
View ArticleRe: EVPN: Traffic flows if L3 interface is available
Thanks for your response. I checked but those commands do not give any output on routers where it shouldn't give any output. Still traffic seems to be able to flow into the VLAN on that router.
View ArticleRe: How to apply local-preference to all routes without a hard reset of EBGP?
Please let me know where are you trying to manipulate the local preference attribute? Is it with the IBGP or the EBGP session? Since, only IBGP peers exchange the values of the local-preference BGP...
View ArticleRe: L3 VPN Hub and Spoke
Hi ErAc, you do not need to configure multiple VRFs. You can go through the below tech pub link which has a better explanation with configuration example. Configuring Hub-and-Spoke VPN Topologies: One...
View ArticleRe: routing-options { static { route 0.0.0.0/0 next-hop 111.11.11.1; route...
Thanks for that worked a treat, changed my policy slightly after doing a bit more reading on route filters and is working like a charm. policy-statement OSPF-Static { term Internet-Addresses { from {...
View ArticleRe: L3 VPN Hub and Spoke
Hi adwivedi, Thanks for the provided links. That was exactly what I was looking for! I will try that out in my lab. ErAc
View ArticleRe: Monitoring Radio between OSPF sites.
I can't seem to connect the ip addresses in your diagram to the configs in my head. So I'm not exactly sure what needs to change. But I am pretty sure your routing difficulties come from having these...
View Articledonot advertise connected networks
this is a basic RIP configuration sample taken from https://www.juniper.net/documentation/en_US/junos12.3/topics/topic-map/rip-basic.html set interfaces fe-1/2/0 unit 2 family inet address...
View ArticleRe: 2 alarms currently active Alarm time Class Description 2016-12-08...
after re-seating FEB3, feb3 alarm disappeared but fpc 2 hard error alarm still persists.Alarm time Class Description2017-01-04 15:16:32 WAT Major FPC 2 Hard errors
View ArticleRe: 2 alarms currently active Alarm time Class Description 2016-12-08...
Hi swati.pandya@ericss, Hard errors which have not cleared evevn after a reseat may be caused by a hardware issue and might require a replacement.I would suggest a JTAC case to be opened to confirm if...
View ArticleRe: donot advertise connected networks
Hello,The following line should solve Your problem:set policy-options policy-statement advertise-routes-through-rip term 1 from interface [ fe-1/2/0.2 fe-1/2/1.5 ]Please test and report back.HTHThxAlex
View ArticleRe: Backup-RE communication failure
1. Can we make the 2.2.2.0 route available in inet.0 table and see if backup RE is getting polled from SNMP server in 2.2.2.0 subnet?>>>Before breaking our monitoring, tested it on another IP...
View Article