Re: Overload bit in ISIS
This feature is typical for your type of setup. When you have redundant paths configuring the overload timer lets the rebooted device have a lesser load for the timer value via the metrics of...
View ArticleRe: How to monitor DHCP packets in the switch which is not directly connected...
I am not sure I follow your question so forgive me if this is the wrong answer. You should be able to use the monitor interface match parameters to see the DHCP requests on the directly connected ports...
View ArticleRe: ipv6 prefix /127 and /128
The current recommendations for subnetting are as follows from ARIN to service providers, they are generous in size. /48 per customer/56 per site within that customer/126 for point-to-point This is a...
View ArticleRe: How to confirm route 10.0.08/32 go through fxp0 in MX960?
fxp0 is not able to pass any traffic to any other interface on the router including loopback. This only allows destinations to itself it is a no transit interface. this is confusing because the...
View ArticleRe: ipv6 prefix /127 and /128
@spuluka, what are your thoughts on /126 vs /127s for point-to-point connections? I'm seeing carriers take different stances when peering between PE and CE on which is most appropriate. This very much...
View ArticleRe: ipv6 prefix /127 and /128
Unfortunately, I don't see much discussion of ipv6 at all. Frankly most of the people I deal with are still not using it to any great extent. At the local ARIN on the road meeting in Pittsburgh only...
View ArticleHow to disallow readvertise IBGP routes?
By default, JUNOS advertise learnt IBGP routes to other BGP neighbors. For example, the routes learnt from group IBGP are readvertised to group EBGP. bgp { group EBGP { type external; peer-as 2;...
View ArticleRe: How to disallow readvertise IBGP routes?
policy-statement NO-EXPORT term 1 { from { protocol bgp; route-type internal; } then reject; } and then add this policy before your normal one ( or merge) bgp { group EBGP { type external; peer-as 2;...
View ArticleClik here to view.
Re: ipv6 prefix /127 and /128
I very much agree with you. There continues to be a laissez-faire attitude regarding IPv6 deployment across enterprises and other industries. There are, unfortunately, many options to continue...
View ArticleRe: IPSEC Tunnel over VLANS
Good morning, They want to create a second tunnel and not use the first one.
View ArticleRe: VPN and routing
Hi Aigarz!I include "ike" in the command line, without this parameter the command gave error. Is this correct in this way? set security ipsec vpn VPN_Finep_Site_to_Site ike proxy-identity local...
View ArticleRe: VPN and routing
Hi rtilak! I think the peed device is a Cisco ASA. I do not have access to it.regardsBruno
View ArticleRe: COS - Asymmetric Mapping between Classifier and Rewrite Rules
No one up on this issue ?Still waiting for coments from Gurus.....
View ArticleRe: purpose of having p2p ospf link information in router-LSA
If you take a look at the RF2328, it seems to determine what information is placed in the LSA header. Look at page 127 and also more specifically this section, to get a better explanation from the...
View ArticleRe: COS - Asymmetric Mapping between Classifier and Rewrite Rules
The classifier is really telling the Switch/Router I want to give these packets special treatment in the Output Queues in the event there is congestion on the egress interface, so I am assigning the...
View ArticleRe: Why is the vrrp not running?
Take a look at this explanation for these interfaceshttp://forums.juniper.net/t5/Routing/Show-interface-terse-in-Juniper/td-p/302355See this article understanding the interface requirements for...
View ArticleRe: COS - Asymmetric Mapping between Classifier and Rewrite Rules
Hi Lyndidon, Thank you for your comments. But my question is still unanswered. As I explained, I have packets in EF with 3 different PLPs but the rewrite rule says that the packets in EF queue with...
View ArticleRe: mdt default and mdt data groups
Though this is way above my limited kss, it seems like you are missing the tunnel paramter as indicated by the commit failure: PIM: Failed to configure data mdt tunnel[edit...
View ArticleRe: mdt default and mdt data groups
HI , Error message is because you have not configured Default MDT & have only provisioned Data MDT. Error message you are seeing is not because of the fact that "mdt" knob is deprecated under PIM...
View ArticleWhat commands are used to show vlan status and config in MX960?
Hi MX960 is router. but it looks like the router has some vlan functions. It's diffiult to find some show commands in website. Anyone can provode with some show commands in order to get some vlan...
View Article